Search

Johnson Wi

Controls
COMMERCIAL SALES AGREEMENT

IF MAINTENANCE SERVICE IS DECLINED, CUSTOMER MUST INITIAL
HERE

JOHNSON CONTROLS SECURITY SOLUTIONS LLC

Presented by:

(Signature of Johnson Controls Sales Representative)

Sales Agent: Christopher Lowe
Sales Representative Registration Number (if applicable):

SB & S oO wu = oO a

TOWN NO. CUSTOMER NO. JOB NO. PO NO. ESTIMATE NO.
0069-MANCHESTER, 1-5FK4E8P
NH

IF A 5-DAY FAMILIARIZATION PERIOD IS REQUESTED, CUSTOMER MUST INITIAL
HERE

CUSTOMER:

Accepted By:

(Signature of Customer’s Authorized Representative)

(Name Printed)

Title:

Date Signed:

[Remainder of Page Left Intentionally Blank]

e-Form 8880UE01 (09/2019)

Page 2 of 9
© 2019 Johnson Controls. All Rights Reserved

Johnson Wi

Controls

COMMERCIAL SALES AGREEMENT

TOWN NO.
0069-MANCHESTER,
NH

CUSTOMER NO.

SCOPE OF WORK / SCHEDULE OF PROTECTION

JOB NO. PONO. ESTIMATE NO.
1-5FK4E8P

IV. SCOPE OF WORK / SCHEDULE OF PROTECTION (‘SOW’): Johnson Controls agrees to install or cause to be installed the Equipment and furnish the Service(s), collectively, the System,
on the terms and conditions set out in this Agreement.

A. Ownership of System and/or Equipment: Direct Sale (equipment to become property of the Customer upon payment of Installation Charges and Fees in full).

B. Services to be Provided (“Services”)

Alarm monitoring and Notification Services:
Video Surveillance Services:

Managed Access Control Services:

Video Equipment:

Maintenance Service Plan; Preventive Maintenance/Inspection:

Additional Services:

No Service Selected
No Service Selected
No Service Selected

Closed Circuit Television PROVIDED

No Service Selected
No Service Selected

C. — Equipment to be Installed (“Equipment”): Johnson Controls will install, or cause to be installed, the Equipment (or equivalent), as set forth in this SOW in Customer's designated facility(ies).
As used herein, ‘installation’ means: (i) affixing all Equipment and materials provided by Johnson Controls at such locations within the facility(ies) as are designated by Customer, (ii) providing
and pulling cables/wires required to connect the Equipment to Customer's Communications Facilities and making such connections; (iii), in the case of a Digital Communicator installation,
mount Equipment and plug into RJ31X phone jack previously installed by Customer; (iv) in the case of radio installation, mount radio Equipment and program Equipment with number furnished
by Customer; (v) providing and installing software/firmware required by the Equipment; (vi) performing testing as required to establish that the Johnson Controls Equipment is connected, is
functioning according to its specifications, and is communicating over Customer's Communications Facilities; and (vii) providing user-level training to Customer's designated representative in
the use of such Equipment.

Qty
1

=a min) olnw

or) o1, O11) O1

Product Name

NVR, IP 2U 10TB 3 YR WARR WITH 4 IP CAMERAS WIND10 120 SSD. HDMI, DVI-I
CSA OPTION - A SERIES - I7 CPU 8GB RAM (TOTAL 16GB). NOT FIELD UPGRADEABL

26" RACKMOUNT SLIDING
EXACQ Vision Camera License

RAIL KIT FOR EXACQVISION Z-SERCHASSIS & EL-1U

ILLUSTRA FLEX 8MP MINI-DOME, 3.4-9MM, OUTDOOR, VANDAL, CLEAR, WHITE, TDN WAR,

T

Discover Pole Mount Adapter for ADCDMWALL - White
Mount, wall arm, for NV LookOut, no plate, use w/ ADLOMA

illustra 600/610M pendant cap

illustra 600/610 Dome pendant cap Indoor white

Wireless Bridge/access point
Wireless switch

6 port hardened PoE switch
Industrial Power Supply
NEMA 5-15 power cord

16 port PoE switch

D. CHARGES AND ESTIMATED TAX:

1.

Installation Charge:

Installation Charge Amount
* Estimated Tax(es):
TOTAL INSTALLATION CHARGE:

Installation Deposit Amount:

Annual Service Charge:

Annual Service Charge Amount:

* Estimated Tax(es):

TOTAL ANNUAL SERVICE CHARGE:

e-Form 8880UE01 (09/2019)

$45,733.00
$0.00
$45,733.00
$0.00

$0.00
$0.00
$0.00

Location

Page 3 of 9
© 2019 Johnson Controls. All Rights Reserved

* Tax value shown is estimated and may differ from the actual tax value that will be on the invoice.

E. Scope of Work: This Section is intended for installation use only. Any language contained in this Section that attempts to modify the Terms and Conditions of this Agreement shall be void and
of no effect.

Contact Information: Nick Miseirvitch, 603-589-3305, Miseirvitchn@nashuanh.govil

System Operation: Customer wants to add video cameras to cover the skate park facility, entrance to Mines Falls Park and parking areas between the skate park and \"traffic\” building (yellow metal
building). The Traffic Building will house the recording equipment for this installation. The customer need is to view archive footage of these areas whenever an incident occurs. Customer also
requires remote access to the NVR. Wire runs for the pole mounted equipment will be run inside the pole and JCI will seal all pole penetrations make by JCI. Pole mounted cameras will transmit
wirelessly.1We will be installing the following:11 Exacqvision IP04-10T-f2A professional server w/4 IP camera licenses keyboard and mouse, dual GB NICs software preloaded (traffic building)I1 12
GB additional RAM, 256GB SD NVR upgradel1 Rack mount rail kit for NVRI5 Additional IP camera licenses(9 Illustra Flex 8MB mini-dome cameras (2 traffic building viewing parking lots, 2 pole#1
viewing deep hole in park and entry to Mines Falls, 1 pole #2, 2 pole #3 viewing park entry and general view of park, 1 Pole#4 park view, 1 pole#5 view deep hole)I7 Pole mounts for all pole mounted
cameras Goose neck wall mounts for all camerasi9 Pendant cabs for all camerasi1 Etherwan EW75000-08 Hardened managed IP67 wireless bridge/access point with omnidirectional antenna PoE
poweredib Etherwan EW75000-13 hardened managed IP16 wireless bridges (pole mounted cameras)Ib Etherwan EX42395BT hardened 6 port PoE+ etherrnet switches (pole mounted in customer
provided weatherproof enclosure w/power}I5 Etherwan NDR-240-48 industrial power supply for above switches5 6' power cords for above power supplies] Etherwan EX17 162 16 port PoE switch
for NVR and 2 traffic building mounted camerasiCat5e cable for traffic building mounted cameraslOutdoor direct burial CatSe for pole mounted camerasiLiquid Tight Conduit for pole mounted
equipmentid weatherproof enclosures 6x6x4 (inches) mounting at top of pole used as a junction box.

Programming Info: 30 day archive, 15 FPS, Motion activated recording, highest possible compression.

Site Conditions: Traffic building is existing metal building, skate park is new with 6 light poles. See diagram in installer's packet for pole designations and positions.

Existing Equipment: None

Customer Expectations: None

Training Expectations: Johnson Controls installer will provide enduser training on Exacqvision software and remote app.

General Comments: None

Customer Responsibilities / Johnson Controls Exclusions: 1 provide access to all necessary parts of the facilities M-F, 8am -5pml2. Provide single duplex outlet for pole mounted cameras with
continuous power along with a weatherproof NEMA enclosure (12\"Hx12\"Wx6\"D) mounted between 10 to 12 feet from the ground. (Poles 1,2,3,4 and 5; see diagram)I3. Provide power outlets in
\'traffic\” building for server, monitor, PoE switch.[4. customer is providing monitor for server.5. customer to provide IT and Facility staff to aide the installationl6 customer needs to be present when
aiming cameras to approve FoVI7 Customer needs to be present for training.I8. Customer will coordinate pole installer and electrician to be on-site to aide this installation.19. Customer will provide
static IP address for remote access capability.1Contingency: Installations of this nature may uncover unforeseen complications that may require additional material and labor hours. In these cases a
change order will be required to add these additional charges to the job.

Documentation Needs: None

Contract Notes -

e-Form 8880UE01 (09/2019) Page 4 of 9
© 2019 Johnson Controls. All Rights Reserved

TERMS AND CONDITIONS
TERMS AND CONDITIONS
V.Customer and Johnson Controls agree as follows:
A. Services.
A.1.Central Station Signal Receiving and Notification (Alarm Monitoring) Services. Intentionally left blank - Services have not been purchased.
A.2.Communication Facilities. Intentionally left blank — Alarm Monitoring Services have not been purchased.
A3.1 Basic Maintenance Service Plan. Intentionally left blank - Services have not been purchased.
A3.2 Advanced Maintenance Service Plan. Intentionally left blank - Services have not been purchased.
A3.3 Precision Maintenance Service Plan. Intentionally left blank - Services have not been purchased.
A4. Testing/Inspections Service (“T/l’}. Intentionally left blank - Services have not been purchased.
A5.Investigator Response Service. Intentionally left blank - Services have not been purchased.
A&. Select View Managed Video Services/Interactive Video Monitoring Services. Intentionally left blank - Services have not been purchased.
A&.1.Video/Audio Alarm Verification Service/Video Verification. Intentionally left blank - Services have not been purchased.
A&.2.Video Guard Tour. Intentionally left blank - Services have not been purchased.
A&.3.Video Escort. Intentionally left blank - Services have not been purchased.
A&.4.Video Assist. Intentionally left blank - Services have not been purchased.
A6.5.Video Audit. Intentionally left blank - Services have not been purchased.
A&.6.Outdoor Interactive Video Monitoring Services. Intentionally left blank - Services have not been purchased.
A&.7. Managed Video Portal. Intentionally left blank - Services have not been purchased.
A.6.8.Unattended Delivery — Alarm Based Video Monitoring. Intentionally left blank - Services have not been purchased.
A&6.9.Unattended Delivery — Live Video Monitoring of Process - Intentionally left blank - Services have not been purchased.
A.9. Vision/Vision with Auditing. Intentionally left blank - Service is no longer offered.
A.10. Hosted Access. Intentionally left blank - Services have not been purchased.
A.11. Data Hosting/Storage Services. Intentionally left blank - Services have not been purchased.
A.12. Data Hosting/Storage Services Encrypted. Intentionally left blank - Services have not been purchased.
A.13. Mobile Security Management (“MSM’) Services. Intentionally left blank - Services have not been purchased.
A.13. Mobile Security Management (“MSM’) Services. Intentionally left blank - Services have not been purchased.

A.14. Software Support Services. If Software Support Services (“SSS”) are purchased they will be provided on licensed software titles expressly identified in this agreement, (the “Covered
Software’). Support Conditions. SSS for Covered Software are subject to the following conditions (“Support Conditions’): (a) Johnson Controls’ receipt of the Software Support Fee; (b) the
Covered Software is not modified from its standard form originally licensed by the software owner/licensor (“Licensor’); (c) Customer's use of Covered Software is in accordance with the
end user license agreement (“EULA”) between Customer and Licensor; if applicable; (d) Customer provides Johnson Controls (and/or its authorized representatives) with and when
necessary (1) any information and/or documentation required to recreate the problem, defect, or non-conformity (individually/collectively, a “Problem’), (2) log in privileges for remote trouble
shooting, (3) TCP/IP Ethernet network addresses, and (4) access to Customer's network, servers and/or hardware; and (e) the processor, operating system and associated system
software, and other interdependent or reliant software are operating properly. Exclusions. Johnson Controls will not provide SSS when a Problem is caused by (a) relocation, movement,
improper operation, neglect or misuse of the Covered Software or associated Equipment/System; (b) Customer's failure to maintain proper site or environmental conditions; (c) any attempts
at configuration, repairs, support, or modifications to the Covered Software not performed by a Johnson Controls authorized representative; (d) discontinued systems or software; (e)
casualty, act of God, the unauthorized acts of third parties; (f} failure or interruption of electrical power, telephone or communication line or like cause, or (g) any other cause external to the
Covered Software. Problem Resolution. Johnson Controls will provide Customer with email and telephone support on the Covered Software. Johnson Controls then will use reasonable
commercial efforts to resolve and correct the Problem within forty-eight (48) hours. Problem resolution and correction may be provided at Johnson Controls’ discretion as a software fix or
workaround. Johnson Controls will periodically advise Customer on Johnson Controls progress in diagnosing and/or correcting the reported Problem. Customer acknowledges that Johnson
Controls may be unable to resolve Problem due to (a) Johnson Controls inability to recreate, locate or identify the Problem; (b) issues related to Customer's system hardware, network or
Internet connectivity issues; or (3) issues for which the Original Equipment Manufacturer (“OEM”) and/or Licensor (collectively, also referred to as an “Johnson Controls Supplier’) has not
provided a resolution or workaround. If Johnson Controls is unable to resolve or correct a Problem, Johnson Controls will notify Customer and provide underlying information as available.
Notwithstanding anything to the contrary herein, Johnson Controls makes no warranties that its efforts will be successful in diagnosing, resolving, or correcting any Problem. Software
Updates. Customer understands that the SSS provides access to updates and upgrades but do not include the provision of software update or upgrade services unless purchased. If
software upgrades are required to correct a Problem, such software upgrades will be provided, at Customer's request, on a time and materials basis at Johnson Controls’ then-current
hourly rates as such upgrades become available from the Johnson Controls Supplier. On Site Engineer Support Services. If Johnson Controls determines that on-site engineer support
services (“ESS”) are necessary to correct a Problem, Johnson Controls will provide ESS on a time and materials basis at Johnson Controls’ then current ESS rates plus any related travel or
other expenses. Such ESS may include on-site software installation assistance, training, or Problem diagnosis, resolution, and/or correction. Return of Defective Media. Customer may
return any defective media directly to Johnson Controls using a Johnson Controls furnished return authorization number. Fee for Reinstatement. Customer may incur reinstatement charges
(‘Reinstatement Fee’) at Johnson Controls then current rates, if it allows SSS to lapse and later requests reinstatement within one year from the time the SSS lapses. Limitation of Liability.
Notwithstanding anything in the Agreement to the contrary, Customer acknowledges and agrees that neither Johnson Controls nor its Supplier will be responsible for Problems caused by
changes in the operating characteristics of the Equipment/System upon which the Covered Software is operating, or for problems in the interaction of the Covered Software with Customers
Network or existing software/firmware/hardware. In no event will Johnson Controls and/or Johnson Controls Supplier be liable for any (a) third party claims; (b) loss or damage to any
systems, records or data, or liabilities related to a violation of an individual's privacy rights; or (c) indirect, incidental, special, consequential, punitive, reliance, or cover damages (including
lost profits and lost savings). Customer further agrees that, in no event will Johnson Controls’ and/or Johnson Controls Supplier's aggregate liability regardless of cause (including, but not
limited to, liability for negligence, strict liability, breach of contract, misrepresentation and other contract or tort claims) arising from the provision of or failure to provide SSS and/or
Customer's use of or inability to use any Covered Software or related System, exceed the lesser of USD$1,000 or the total SSS Fees paid by Customer.

A.15. Lynx Network Duress and Emergency Notification System (“Lynx System’). Intentionally left blank — Lynx System/Services have not been purchased.
A.16. RFID Tracking System (“System’). Intentionally left blank - RFID Systems have not been purchased.

A.17. HID SEOS Mobile Credential Service (“Service”). Intentionally left blank - Service has not been purchased.

A.18. Customer For Life Program (“Service”). Intentionally left blank - Service has not been purchased.

A.19. Outdoor Radar Perimeter Protection. Intentionally left blank - System has not been purchased.

e-Form 8880UE01 (09/2019) Page 5 of 9
© 2019 Johnson Controls. All Rights Reserved

A.20. Self-Printing Service. Intentionally left blank - Service has not been purchased.

A.21. Audio Enabled Devices. Intentionally left blank - Equipment has not been purchased.
A.22. Proactive Health Services. Intentionally left blank - Services have not been purchased.
A.23. Automated Notification. Intentionally left blank - Services have not been purchased.
A.24, Remote Technical Services. Intentionally left blank - Services have not been purchased
A.25. Anyvision Devices. Intentionally left blank - Equipment has not been purchased.

A.26. WhosOnLocation Service. Intentionally left blank - Services have not been purchased.
A.27 Vape Detection System. Intentionally left blank - Services have not been purchased.

A.28. Additional Services. If any other services, including but not limited to the following, are being furnished under this Agreement, Customer and Johnson Controls will enter into a
separate Rider that will be attached to and incorporated as part of this Agreement: (a) Select Link - Immediate Response Information System (IRIS) (b) Managed Access Control (c)
Electronic Article Surveillance (“EAS’) (d) Guard Response Service (e) Radio Frequency Identification (“RFID”) (f} Training Services (g) Watchman’s Reporting Service.

B. Warranty (90-Day). 1. If the transaction type is “Direct Sale’, any part of the System (as distinguished from the Firmware/Software) installed under this Agreement, including the wiring,
which proves to be defective in material or workmanship within ninety (90) days of the date of completion of the installation (‘Warranty Period’), will be repaired or replaced, at in Johnson
Controls’ option with a new or functionally operative part. Materials required to repair or replace such defective components will be furnished at no charge during the Warranty Period.
Warranty Services will be furnished during Johnson Controls’s “Normal Working Hours” (between 8:00 A.M. and 4:30 P.M. Monday through Friday, except holidays). Warranty Service
performed outside of these hours is subject to additional charges. 2. For “Johnson Controls-Owned’ equipment/systems: (a) the equipment/systems are provided “AS IS” and without
warranty; and (b) Customer is responsible to maintain such equipment/system in good working order.

3. The following “Conditions” are not covered by Warranty: (a) damage or extra service tine needed resulting from accidents, acts of God, lightning, strikes, riots, floods, terrorism, acts of
War, alteration, misuse, tampering or abuse, adjustments, repairs or maintenance not performed by Johnson Controls, or from parts, equipment, accessories, attachments or other devices
not furnished by Johnson Controls; (6) Customer's failure to properly follow operating instructions provided by Johnson Controls or OEM; (c) adjustments necessitated by misalignment of
video cameras, improper adjustment of monitor brightness and contrast tuning dials or insufficient light on the area viewed by the camera(s); (d) trouble due to interruption of Internet,
telecommunications, and/or electrical service; (e) battery failure; (f} devices designed to fail in protecting the equipment/system, such as, but not limited to, fuses and circuit breakers; and
(g) System modifications/customization requested by Customer. If Customer calls Johnson Controls for Warranty Service and Johnson Controls’ representative finds that one of the
“Conditions” has led to the inoperability or apparent inoperability of the Equipment/System or any component, Johnson Controls may bill Customer for the service call whether or not
Johnson Controls actually works on the Equipment/System. If repairs are required due to one of the above "Conditions’, Johnson Controls will charge Customer for such work on a time
and materials basis at Johnson Controls’ then applicable rates for labor and materials.

4. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE CUSTOMER'S EXCLUSIVE REMEDY WITH RESPECT TO ANY AND ALL LOSSES OR DAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING JOHNSON CONTROLS' NEGLIGENCE, IS REPAIR OR REPLACEMENT AS SPECIFIED ABOVE. JOHNSON
CONTROLS WILL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, DAMAGES FOR
PERSONAL INJURY OR DAMAGES TO PROPERTY, HOWEVER OCCASIONED, WHETHER ALLEGED AS RESULTING FROM BREACH OF WARRANTY OR CONTRACT BY
JOHNSON CONTROLS OR NEGLIGENCE OF JOHNSON CONTROLS OR OTHERWISE.

C. System Requirements, Miscellaneous. 1. Vaults. Customer must ensure that any Customer vault protected by sound or vibration detector systems has the minimum construction
characteristics prescribed by the Underwriters’ Laboratories, Inc. 2. System Testing. Customer must test all detection devices or other electronic equipment according to procedures
prescribed by Johnson Controls prior to setting the alarm system for closed periods and must notify Johnson Controls promptly if such equipment fails to respond to any such test. 3.
Familiarization Period. UNLESS CUSTOMER HAS REJECTED THE FAMILIARIZATION PERIOD (EXCEPT WHERE A FAMILIARIZATION PERIOD IS REQUIRED BY LAW},
CUSTOMER AGREES THAT: (a) DURING A FIVE (5) DAY FAMILIARIZATION PERIOD, OR SUCH PERIOD AS IS REQUIRED BY LAW; AND (b) FOLLOWING COMPLETION OF THE
INSTALLATION AND THE COMMUNICATIONS CONNECTION TO JOHNSON CONTROLS' CMC (AND DURING ANY APPLICABLE EXTENSIONS), JOHNSON CONTROLS HAS NO
OBLIGATION TO, AND WILL NOT, RESPOND TO ANY ALARM SIGNAL RECEIVED AT THE JOHNSON CONTROLS’ CMC FROM CUSTOMER'S PREMISES DURING SUCH
FAMILIARIZATION PERIOD. CUSTOMER ALSO AGREES THAT DURING SUCH PERIOD JOHNSON CONTROLS HAS NO OBLIGATION TO, AND WILL NOT, NOTIFY ANY
AUTHORITIES, CUSTOMER, OR A PERSON ON CUSTOMER'S EMERGENCY CONTACT LIST, OR TAKE ANY OTHER ACTION WITH REGARD TO ANY ALARM SIGNAL JOHNSON
CONTROLS RECEIVES, EVEN IF DUE TO AN ACTUAL EMERGENCY EVENT. 4. Special Equipment Requirements. If Customer requires installation or service of equipment in areas
inaccessible without the use of lifts or cranes, or if non-standard conditions at the Customer site require special equipment for installation or service, Customer will provide such equipment,
or will reimburse Johnson Controls for any applicable charges or fees. 5. Training Services. Johnson Controls provides initial training to Customer on use of the equipment installed at the
time of installation. Thereafter, Customer may purchase additional training in one-hour increments at Johnson Controls’ then current rate. 6. Site Preparation, Intrusion and Restoration.
Unless otherwise noted herein, Customer is responsible for providing: (a) any necessary electric current, (b) an outlet within 10 feet of an alarm control panel, (c) telephone connections, (d)
network drops, and (e) any required conduit, wiremold, or other raceway, (f} any required IP address assignments, and (g) additional network software licensing. The installation of the
equipment/system may necessarily require cutting, bolting or fastening into Customer's floors, walls and/or ceilings. Johnson Controls shall not be responsible for any expenses related to
intrusion, mold, fungi, bacteria, wet/dry rot, patching, floor or wall finishing, or paint, tile, carpet or wallpaper matching, restoration or replacement resulting from installation or service of the
equipment/system. 7. Battery Powered Devices. Customer understands that any battery-powered motion detectors, smoke detectors, door and window contact transmitters and other
detection sensors installed/serviced under this Agreement require batteries to operate. THESE BATTERY-POWERED DETECTION SENSORS WILL NOT OPERATE, AND THE ALARM
WILL NOT SOUND, IF THE BATTERY ENERGY LEVEL OR CHARGE IS LOW, OR DEPLETED. It is Customer's sole responsibility to maintain and replace any batteries. Customer shall
carefully read and follow the owner’s manual, instructions and warnings for all such equipment and regularly inspect the sensors for dirt and dust buildup and test the sensors weekly to help
maintain continued operation. 8. Customer is solely responsible for the establishment, operation, maintenance, access, security and other aspects of its computer network (“Network”) and
shall supply Johnson Controls secure Network access for providing its services. Products networked, connected to the internet, or otherwise connected to computers or other devices must
be appropriately protected by Customer and/or end user against unauthorized access. Customer is responsible to take appropriate measures, including performing back-ups, to protect
information, including without limit data, software, or files (collectively “Data’) prior to receiving the service or products.

7. Closed Circuit Television (“CCTV’Wideo Equipment. (a)System Requirements. Customer will provide: (i) adequate illumination under all operational conditions for the proper operation of
any video camera(s); (ii) any required 110 AC power supply; and (iii) appropriate space for monitors. (b)Audio Monitoring/Recording. Customer’s decision to install video equipment with
audio recording and/or monitoring capability (“Video with Audio’) is based solely on Customer’s own independent business judgment, without any involvement or approval of Johnson
Controls. Certain laws may limit or preclude the use of Video with Audio. By installing Video with Audio in Customer’s premises, Customer accepts the responsibility of knowing and fully
complying with all applicable laws, including but not limited to all requirements that clear and conspicuous notice be posted in Customer’s premises warning of Customer's use of audio
recording and/or monitoring equipment on its premises.

8. New York City Fire System. Intentionally left blank.- covered system is not installed in NYC

D. Electronic Media; Personal Information; Consent to Call, Text or Email. 1.Electronic Media. Either party may scan, fax, email, image, or otherwise convert this Agreement into an
electronic format of any type or form, now known or developed in the future. Any unaltered or unadulterated copy of this Agreement produced from such an electronic format will be legally
binding upon the parties and equivalent fo the original for all purposes, including litigation. Johnson Controls may rely upon Customer's assent to the terms and conditions of this
Agreement, if Customer has signed this Agreement or has demonstrated its intent to be bound whether by electronic signature or otherwise. 2. Personal Information. Customer represents
and warrants that Customer has obtained all consents and has the right to (a) disclose to Johnson Controls all personal information disclosed hereunder concerning
individuals/employees/or other third parties including all information contained in Customer's Emergency Call List (“ECL”); (b) permit Johnson Controls to collect (including consent to record
telephone conversations with Johnson Controls), use, disclose and transfer such personal information; and (c) expressly authorizes Johnson Controls to use such personal information to
administer the relationship and the agreement between Customer and Johnson Controls, including, but not limited to, contacting Customer personnel at the telephone numbers and/or email
addresses provided: (i) using SMS, text, prerecorded messages, or automated calling devices to deliver messages to set/confirm a service/installation appointment; and/or (ii) to provide
information or offers about products and services of interest to Customer. Customer acknowledges and agrees that Johnson Controls may share all such information with its parents,

e-Form 8880UE01 (09/2019) Page 6 of 9
© 2019 Johnson Controls. All Rights Reserved

subsidiaries, affiliates and its/their successor corporations or any subcontractor or assignee, within and outside the country in which the Customer is located and thereby subject such
information to the laws of such countries.

E. Limitation of Liability, Indemnification (Sale of Access/Video Equipment and Installation Only). Notwithstanding anything to the contrary in this Agreement or any purchasing document
presented by Customer, only Video and/or Access Equipment and Services shall be provided by Johnson Controls under the terms and conditions of this Agreement. The Equipment and
Services provided by Johnson Controls under this Agreement will not include: (a) burglar and/or fire detection or alarm equipment or monitoring, maintenance, inspection or other services;
(b) security guard services; or (c) architectural, engineering, or design professional services. If any other equipment or services are requested by or provided to Customer, then such
equipment and/or services shall be provided under a separate written agreement executed by Customer and Johnson Controls which shall contain the alarm industry specific terms and
conditions.

4.Indemnity. (a) Johnson Controls shall defend, indemnify and hold Customer, its corporate affiliates, and their respective officers, directors, agents and employees harmless from damage,
liability and expense resulting from the negligent acts or willful misconduct of Johnson Controls’ agents and employees committed while performing Services on Customer's premises, to the
extent that they are the direct cause of the loss, damage or injury to third parties or Customer's property (e.g., equipment dislodging and striking a third party due to improper installation), as
opposed to being caused by an occurrence or the consequences therefrom that the Equipment or Services were intended to deter, detect or avert. (b) Customer shall defend, indemnify and
hold Johnson Controls, its affiliates, and their respective officers, directors, agents and employees, harmless from damage, liability and expense to the extent that any such loss is not
directly caused by the negligent acts or willful misconduct of Johnson Controls’ agents and/or employees, or arises out of any claim related to invasion of privacy, infliction of emotional
distress, harassment, violation of eavesdropping/wiretapping laws or similar claims arising out of Customer's use of the Equipment and/or Services.

2. Limitations on Liability. If Customer uses the Equipment and/or Services to aid in monitoring or controlling the location or activities of persons on or about its property and premises,
Customer acknowledges that the Equipment and/or Services are not intended to be the sole means for doing so. Johnson Controls’ Equipment and Services do not cause and cannot
eliminate occurrences of the events they are intended to deter, detect, avert or record. Johnson Controls is not an insurer of the safety or security of any person, entity or property, or
against the risks attendant to a person’s presence in, or ingress to or egress from any building, property or area that may be monitored by the Equipment and/or Services. The amounts
Johnson Controls charges Customer are not insurance premiums. Such charges are based upon the value of the Equipment and Services provided and are unrelated to any such risk of
loss. Johnson Controls does not undertake and assumes no liability for such risk by providing the Equipment and/or Services. If Johnson Controls is nevertheless found liable under any
legal theory for loss, damage or injury caused directly or indirectly by occurrences or the consequences therefrom which the Equipment and/or Services are intended to deter, detect, avert
or record, Johnson Controls’ liability shall be limited to the sums paid by Customer for the Equipment or Services at issue as Customer's sole remedy. Johnson Controls is not responsible
for the preservation of any computer programs or data and Customer is responsible for maintaining adequate back-ups.

F. Other Charges; Remedies; Termination. 1. There may be a service charge to Customer for cancelled installation/service appointments if Customer cancels less than 24-hours prior to
dispatch, or if Johnson Controls’ representative is sent to the Customer's premises in response to a service call for false alarm or System malfunction caused by Customer's operation
contrary to instructions, failure to close or properly secure a window, door or other protected point, or improper adjustment of monitors or accessory components. 2.Failure to pay amounts
when due is a material breach of this Agreement and shall give Johnson Controls, in addition to any other available remedies, the right to stop performing any Services and/or withhold
further delivery of Equipment and other materials, terminate or suspend any software licenses, and/or terminate this Agreement and to charge interest on the amounts that remain unpaid
more than thirty (30) days past the due date specified in the invoice(s) at a rate equal to the lesser of 1.5% per month or the maximum rate permitted under applicable law, until payment is
made in full... Customer agrees to pay all costs, expenses and fees of Johnson Controls’ enforcement of this Agreement, including collection expenses, court costs, and attorneys’ fees. In
the event of Customer’s default, the balance of any outstanding amounts will be immediately due and payable. Installation Charge(s) are based on Johnson Controls performing the
installation with its own personnel. If for any reason installation must be performed by outside contractors, Installation Charge(s) may be subject to revision. 3.In addition to any other
remedies available to Johnson Controls, Johnson Controls may terminate this Agreement and discontinue any Service(s) if (a) Johnson Controls’ CMC is substantially damaged by fire or
catastrophe or if Johnson Controls is unable to obtain any connections or privileges required to transmit signals between the Customer's premises, Johnson Controls' CMC or the Municipal
Fire or Police Department or other first responder; (b) Customer fails to follow Johnson Controls’ recommendations for the repair or replacement of defective parts of the System not
covered under the Warranty or QSP Service; (c) Customer's failure to follow the operating instructions provided by Johnson Controls results in an undue number of false alarms or System
malfunction; (d) in Johnson Controls’ sole opinion, the premises in which the System is installed are unsafe, unsuitable, or so modified or altered after installation as to render continuation
of Service(s) impractical or impossible; (e) Johnson Controls is unable to obtain or continue to support technologies, TeleCom Services, Communication Facilities, Equipment or component
parts thereof that are discontinued, become obsolete or are otherwise not commercially available; or (f} Customer fails to make payments when due or otherwise breaches this Agreement.
Johnson Controls will not be liable for any damages or subject to any penalty as a result of any such termination.

G. Hazardous Materials. For all projects except those involving new construction, Customer represents and warrants that to the best of Customer's knowledge the work site is free of any
hazardous materials. The term “hazardous materials’ includes but is not be limited to asbestos, asbestos-containing material, polychlorinated biphenyl (“PCB”), formaldehyde or other
potentially toxic or otherwise hazardous material. If any such substance is discovered on the work site, Johnson Controls will not be required to install or service the Equipment at such site
unless and until Customer certifies the removal or safe containment of such hazardous materials. Customer shall indemnify, defend, and hold Johnson Controls, its officers, directors,
agents, and vendors harmless from any damages, claims, injuries, liabilities resulting from the exposure of Johnson Controls’ employees, contractors, or subcontractors to hazardous
materials at the work site; provided, however, that the foregoing provision will not apply when it has been determined that such hazardous materials were brought to the work site by
Johnson Controls.

H. Waivers. 1.Waiver of Jury Trial. CUSTOMER AND JOHNSON CONTROLS BOTH AGREE TO WAIVE THEIR RIGHT TO A JURY TRIAL IN ANY LEGAL PROCEEDING ARISING OUT
OF OR IN ANY MANNER CONNECTED WITH OR RELATED TO THIS AGREEMENT. 2.Mutual SAFETY Act Waiver. Certain of Johnson Controls’ systems and services have received
Certification and/or Designation as Qualified Anti-Terrorism Technologies (“QATT’) under the Support Anti-terrorism by Fostering Effective Technologies Act of 2002, 6 U.S.C. §§ 441-444
(the “SAFETY Act’). As required under 6 C.F.R. 25.5 (e), to the maximum extent permitted by law, Johnson Controls and Customer hereby agree to waive their right to make any claims
against the other for any losses, including business interruption losses, sustained by either party or their respective employees, resulting from an activity resulting from an “Act of Terrorism’
as defined in 6 C.F.R. 25.2, when QATT have been deployed in defense against, response to, or recovery from such Act of Terrorism.

|. Miscellaneous. 1.Enforceability. If any of the provisions of this Agreement shall be determined to be invalid or unenforceable, the remaining provisions shall remain in full force and effect.
2.Paragraph and Section Headings; Captions; Counterparts. The headings and captions contained in this Agreement are inserted for convenience or reference only, and are not to be
deemed part of or to be used in construing this Agreement. This Agreement may be executed in any number of counterparts, each of which shall be deemed to be an original, but all such
separate counterparts shall together constitute but one and the same agreement. 3. FARs. Johnson Controls supplies “commercial items” within the meaning of the Federal Acquisition
Regulation (FAR), 48 CFR Parts 1-53. As to any customer order for a U.S. government contract or funded directly or indirectly with Federal funds, Johnson Controls will comply only with the
following mandatory flow-downs for commercial item subcontracts pertaining to Utilization of Small Business Concerns, Equal Opportunity, Affirmative Action, and Veterans Employment:
52.219-8; 52.222-26; 52.222-35; 52.222-36; and 52.222-37. 4. Export Control. Customer shall not export or re-export, directly or indirectly, any: (i) product or service provided under this
Agreement; (ii) technical data; (iii) software; (iv) information; or (v) items acquired under this Agreement to any country for which the United States Government (or any agency thereof)
requires an export license or other approval without first obtaining any licenses, consents or permits that may be required under the applicable laws of the U.S. or other foreign jurisdictions,
including the Export Administration Act and Regulations and shall incorporate in all export shipping documents the applicable destination control statements. Customer shall, at its own
expense, defend, indemnify and save Johnson Controls harmless from and against all third party claims, liability, loss or damage (including attorneys’ fees and other defense costs),
assessed against or suffered by Johnson Controls as a result of an allegation or claim of noncompliance by Customer with this Section. The obligations contained in this Section shall
survive the termination or expiration of this Agreement. 5.Insurance. Johnson Controls maintains comprehensive General Liability and Automobile Liability Insurance in amounts that meet
or exceed: $1,000,000 per incident - $2,000,000 in the aggregate and Worker's Compensation coverage as required by law. Johnson Controls will not be required to provide a waiver of
subrogation in favor of any party, nor will Johnson Controls be required to designate any party as a statutory employer for any purposes. 6. Johnson Controls Brand. Without exception,
Johnson Controls-branded Signage, including yard signs, window stickers and warning signs will remain the property of Johnson Controls and may be removed by Johnson Controls at any
time. Customer's right to display Johnson Controls-branded Signage is not transferable and ceases upon termination or expiration of this Agreement. 7.Resale. If Johnson Controls is
connecting to a previously installed existing system, to the extent the previously installed existing system is Customer's properly, it shall remain Customer's property.

J. System Software; Network Connections. 1. Any software provided with the System or in connection with the Services is proprietary to Johnson Controls and/or Johnson Controls’
supplier(s) and is licensed or sublicensed to Customer on a non-exclusive basis. Customer may not (a) disclose the Software or source code to any third parties, (b) duplicate, reproduce, or
copy all or any part of the Software, or (c) use the Software on equipment other than with the designated System with which it was furnished. A separate Software License Agreement or
End User License Agreement between Johnson Controls and Customer and/or the software publisher may be required to use the software and/or obtain updates/upgrades. If the installed
Equipment is to be connected to Customer's computer network (“Network’}, Johnson Controls will furnish and install the software needed to run the Equipment and will connect the
Equipment to the Network according to the Network settings supplied by Customer. Installation shall not include modifications to the Network, security, or firewall settings. Customer will
supply a TCP/IP Ethernet network address and central processing unit per Johnson Controls specifications for access control system operation. Johnson Controls shall not be responsible

e-Form 8880UE01 (09/2019) Page 7 of 9
© 2019 Johnson Controls. All Rights Reserved

for the setup, operation, or maintenance of the Network or Network performance or compatibility issues. Johnson Controls may assess additional charges, if Johnson Controls is unable to
connect to the Network or if any additional Equipment is required to facilitate connectivity between the Network and the Equipment. 2. Open Source Software. Johnson Controls represents
and warrants to the end user of the System that, to the extent the System includes any Open Source Software, the internal use and operation of the System by the end user will not create
any obligation on the part of the end user under the terms of any Open Source License (i) to make any source code or object code available to third parties, or (ii) to license, disclose or
otherwise make available to third parties any proprietary software, data or other information, or any associated intellectual property. As used herein, the term “Open Source Software”
means any software, program, module, code, library, database, driver or similar component (or portion thereof) that is royalty free, proprietary software, the use of which requires any
contractual obligations by the user such as, without limitation, that software that is subject to, distributed, transmitted, licensed or otherwise made available under any of the following
licenses: GNU General Public License, GNU Library or “Lesser” Public License, Berkeley Software Distribution (BSD) license (including Free BSD and BSD-style licenses), MIT license,
Mozilla Public License, IBM Public License, Apache Software License, Artistic license (e.g., PERL), Sun Industry Standards Source License, Sun Community Source License (SCSL), Intel
Open Source License, Apple Public Source License, or any substantially similar license, or any license that has been approved by the Open Source Initiative, Free Software Foundation or
similar group (collectively, “Open Source Licenses’).

K. Force Majeure. Johnson Controls shall not be liable, nor in breach or default of its obligations under this Agreement, for delays, interruption, failure to render services, or any other failure
by Johnson Controls to perform an obligation under this Agreement, where such delay, interruption or failure is caused, in whole or in part, directly or indirectly, by a Force Majeure Event.

A “Force Majeure Event’ is a condition or event that is beyond the reasonable control of Johnson Controls, whether foreseeable or unforeseeable, including, without limitation, acts of God,
severe weather (including but not limited to hurricanes, tornados, severe snowstorms or severe rainstorms), wildfires, floods, earthquakes, seismic disturbances, or other natural disasters,
acts or omissions of any governmental authority (including change of any applicable law or regulation), epidemics, pandemics, disease, viruses, quarantines, or other public health risks
and/or responses thereto, condemnation, strikes, lock-outs, labor disputes, an increase of 5% or more in tariffs or other excise taxes for materials to be used on the project, fires, explosions
or other casualties, thefts, vandalism, civil disturbances, insurrection, mob violence, riots, war or other armed conflict (or the serious threat of same), acts of terrorism, electrical power
outages, interruptions or degradations in telecommunications, computer, network, or electronic communications systems, data breach, cyber-attacks, ransomware, unavailability or shortage
of parts, materials, supplies, or transportation, or any other cause or casualty beyond the reasonable control of Johnson Controls. If Johnson Controls’ performance of the work is delayed,
impacted, or prevented by a Force Majeure Event or its continued effects, Johnson Controls shall be excused from performance under the Agreement. Without limiting the generality of the
foregoing, if Johnson Controls is delayed in achieving one or more of the scheduled milestones set forth in the Agreement due to a Force Majeure Event, Johnson Controls will be entitled to
extend the relevant completion date by the amount of time that Johnson Controls was delayed as a result of the Force Majeure Event, plus such additional time as may be reasonably
necessary to overcome the effect of the delay. To the extent that the Force Majeure Event directly or indirectly increases Johnson Controls’ cost to perform the services, Customer is
obligated to reimburse Johnson Controls for such increased costs, including, without limitation, costs incurred by Johnson Controls for additional labor, inventory storage, expedited shipping
fees, trailer and equipment rental fees, subcontractor fees or other costs and expenses incurred by Johnson Controls in connection with the Force Majeure Event.

L. Assignment. This Agreement is not assignable by the Customer except upon written consent of Johnson Controls first being obtained. Johnson Controls shall have the right to assign
this Agreement or to subcontract any of its obligations under this Agreement without notice to Customer.

M. Software and Digital Services. Use, implementation, and deployment of the software and hosted software products (“Software”) offered under these terms shall be subject to, and
governed by, Johnson Controls’ standard terms for such Software and Software related professional services in effect from time to time at httos:/Avww.johnsoncontrols.com/techterms
(collectively, the “Software Terms’). Applicable Software Terms are incorporated herein by this reference. Other than the right to use the Software as set forth in the Software Terms,
Johnson Controls and its licensors reserve all right, title, and interest (including all intellectual property rights) in and to the Software and improvements to the Software. The Software that is
licensed hereunder is licensed subject to the Software Terms and not sold. If there is a conflict between the other terms herein and the Software Terms, the Software Terms shall take
precedence and govern with respect fo rights and responsibilities relating to the Software, its implementation and deployment and any improvements thereto.

N. Johnson Controls License Information: AL 1498, 1499, 1500, 1501, 1502, A-0244, The Security Industry is governed by the rules and regulations of the Alabama Electronic Security
Board of Licensure. If you would like information on these rules and regulations or would like to register a complaint you can contact the Board at: AESBL 7956 Vaughn Rd., Montgomery
36116, (334) 264-9388 Fax: 334-264-9332 AK 125516; 1058473, 5430 Fairbanks Street, Suite 7 Anchorage, AK 99507 AR 0000199, 0030740118 Regulated by Arkansas Bd. of Private
Investigators & Private Security Agencies, #1 State Police Plaza Dr., Little Rock 72209, (501) 618-8600 AZ ROC281489, 18267-0 CA 977249: alarm company operators are licensed and
regulated by the Bureau of Security & Investigative Services, Dept. of Consumer Affairs, Sacramento, CA 95814 CT 0106099-L5 DC ECS1327 FL EF20000890, EF20000341 ,EF0000478
GA LVA002833, LVA205386, LVU004635 HI CT-32427 ID PWC-C-12256-A-4, RCE-33602, EC012834 IL 127001526, 128000247, 128000246, 128000243 LA 24889, F523, F489 MA 401-
C, MI 3601206912, A-0352, A-0170, 3602206914, A-0638, 3602206913, A-1058, A-1199 Whitcomb Avenue Madison Heights, MI 48071; MN TS651063 MS 15024088, 19530-SC NC 846-
CSA, 28510-SP-FAVLV, 19385-SP-FA/LV, 27353-SP-FA/LV, 197 18-SP-FA/LV, 24191-SP-FA/LV, 22850-SP-FA/LV 101 Industrial Drive, Ste 104 Raleigh, NC 27069, (919) 788-5320 NJ
34BF00050200, P00451, 607013 NM 375283 NV 0077542, F470, F469, NY 12000327404, Licensed by NYS Dept. of State OH E16782, 50-18-1052, 50-25-1050, 50-48-1032, 50-57-
1119, 53-31-1582 OK AC-67 OR CLE-322, 197010, AC-67 PA Pennsylvania Home Improvement Contractor Registration Number; PA0Q10083 RI 18004, AF-09170 TN ACC 1704,
ACC1705, ACC 1707, ACC1708, ACC 1709, ACC710, ACC1711 TX B00536, 4200 Buckingham Road Ste 150, Ft. Worth, TX 76115 - Dept of Public Safety, Private Security 5805 N. Lamar
Blvd, Austin 78752, ACR-1460 UT 8390557-6501 VA 11-7587, 11-7575, 11-7591, 11-7573, 11-7589, 11-7578, 2705147765 WA JOHNSCS837N4, 19625 62nd Ave South, Ste C112 Kent,
WA 98032 WV 050291. The foregoing list shows only those license numbers Johnson Controls Security Solutions LLC (“Johnson Controls”) is required by law to include on marketing
materials. A comprehensive list of licenses held by Johnson Controls is available on www.johnsoncontrols.com. California Customers Only: Upon completion of the installation of the alarm
system, the alarm company shall thoroughly instruct the purchaser in the proper use of the alarm system. Failure by the licensee, without legal excuse, to substantially commence work
within 20 days from the approximate date specified in the agreement when the work will begin is a violation of the Alarm Company Act.

©2020 JOHNSON CONTROLS. All rights reserved.

e-Form 8880UE01 (09/2019) Page 8 of 9
© 2019 Johnson Controls. All Rights Reserved

Johnson Wi

Controls
COMMERCIAL SALES AGREEMENT
TOWN NO. CUSTOMER NO. JOB NO. PONO. ESTIMATE NO.
0069-MANCHESTER, 1-5FK4E8P
NH
ADDITIONAL TERMS AND CONDITIONS
DATE: 7/22/2020
Johnson Controls Security Solutions LLC (“Johnson David W Deane Skateboard Park
Controls”) d/b/a: David W Deane Skateboard Park
(‘Customer’)
Christopher Lowe Customer Billing Information Customer Premises Serviced
35 Progress Avenue, 229 Main St, Stadium Drive,
Nashua, NH 03062 Nashua, NH 03060 Nashua, NH 03062
Tele. No. Attn: Nick Miseirvitch Attn: Nick Miseirvitch
Tele. No. Tele. No.

Notwithstanding anything in the Agreement to the contrary, Johnson Controls and Customer agree as follows:

All other terms and conditions of the Agreement, except those expressly modified herein, shall remain in full force and effect.

JOHNSON CONTROLS SECURITY SOLUTIONS LLC CUSTOMER:
apohear D. Loewe

Presented by: Accepted By:
(Signature of Johnson Controls Sales Representative) (Signature of Customer’s Authorized Representative)

Sales Agent: Christopher Lowe
Sales Representative Registration Number (if applicable): (Name Printed)

Title:

Date Signed:

e-Form 8880UE01 (09/2019) Page 9 of 9
© 2019 Johnson Controls. All Rights Reserved

een IWMI
Controls

9 75 4UEO0O 7

Proposal for
David W Deane Skateboard Park
Stadium Drive
Nashua, NH 03062

Video System
07/14/2020

This Johnson Controls Security Solutions LLC Proposal (the “Proposal”) contains Johnson
Controls proprietary and business confidential information and may not be shared with third
parties without the prior written consent of Johnson Controls. Johnson Controls’ provision of the
equipment, systems, and/or services described in this Proposal is expressly conditioned upon
Company’s acceptance of the terms and conditions of the standard Johnson Controls Security
Solutions “AGREEMENT” COMMERCIAL TERMS AND CONDITIONS. The system design
and specified equipment are subject to final approval by your local fire department or other
authority having jurisdiction. This Proposal is valid for a period of sixty (60) days from the above
date and any deletions or additions to this Proposal may result in changes to the pricing and/or
terms and conditions.

Inquiries regarding this proposal may be directed to:

Christopher Lowe

Johnson Controls Security Solutions
Phone #:

Cell Phone #: 603-547-5288

Email: christopher.darrow.lowe@jci.com

© Johnson Controls 2018 - All Rights Reserved. Johnson Controls, the Johnson Controls logo are
service/trademarks of Johnson Controls. All other product names and/or company names used herein may be
protected as trademarks of their respective owners.

JOHNSON CONTROLS CONFIDENTIAL AND PROPRIETARY BUSINESS INFORMATION

/ 7, David W Deane Skateboard Park
y ( Stadium Drive
Johnson N Nashua, NH 03062

Estimate Name: Skate Park New CCTV
Controls

DATE 07/14/2020
DEAR Nick Miseirvitch:

Thank you for allowing Johnson Controls Security Solutions LLC (Johnson Controls) the
opportunity to provide David W Deane Skateboard Park with our proposal for Skate Park New
CCTV.

As an industry leader, Johnson Controls’ desire is to bring experience, industry insight and
value to our customers by providing solutions that deliver lasting results while help keeping risk
to a minimum. Your business is our business and helping to reduce your losses while
improving operations means Johnson Controls is consistently evaluating your issues and
needs.

Johnson Controls provides integrated security solutions to businesses like yours throughout
the world. In North America, Johnson Controls maintains over 200 full-service brick and mortar
offices, staffed by more than 10,000 company-trained employees, including over 3,700 service
personnel. With unparalleled presence across the U.S., Johnson Controls service and
installation teams are specially trained and focused on our technology offerings.

We are proud of our history, financial strength and depth and breadth of services we offer and
| look forward to discussing our proposal with you and showing you why Johnson Controls is
the premier leader in the electronic security industry.

| offer you my personal commitment to help ensure Johnson Controls meets your business
needs.

Sincerely,

Christopher Lowe
Commercial Business Solutions

License Information: AL 1498, 1499, 1500, 1501, 1502, A-0244, The Security Industry is governed by the rules and regulations of the Alabama
Electronic Security Board of Licensure. If you would like information on these rules and regulations or would like to register a complaint you can
contact the Board at: AESBL 7956 Vaughn Rd., Montgomery 36116, (334) 264-9388 Fax: 334-264-9332 AK 125516; 1058473, 5430 Fairbanks
Street, Suite 7 Anchorage, AK 99507 AR 0000199, 0030740118 Regulated by Arkansas Bd. of Private Investigators & Private Security Agencies, #1
State Police Plaza Dr., Little Rock 72209, (501) 618-8600 AZ ROC281489, 18267-0 CA 977249; alarm company operators are licensed and
regulated by the Bureau of Security & Investigative Services, Dept. of Consumer Affairs, Sacramento, CA 95814 CT 0106099-L5 DC ECS1327 FL
EF20000890, EF20000341,EF0000478 GA LVA002833, LVA205386, LVU004635 HI CT-32427 ID PWC-C-12256-A-4, RCE-33602, EC012834 IL
127001526, 128000247, 128000246, 128000243 LA 24889, F523, F489 MA 401-C, MI 3601206912, A-0352, A-0170, 3602206914, A-0638,

3602206913, A-1058, A-1199 Whitcomb Avenue Madison Heights, MI 48071; MN Tse51063 MS 15024088, 19530-SC nc
846-CSA, 28510-SP-FA/LV, 19385-SP-FA/LV, 27353-SP-FA/LV, 19718-SP-FA/LV, 24191-SP-FA/LV, 22850-SP-FA/LV 101 Industrial Drive, Ste
104 Raleigh, NC 27069, (919) 788-5320 NJ 34BF00050200, P00451, 607013 NM 375283 NV 0077542, F470, F469, NY 12000327404, Licensed by
NYS Dept. of State OH E16782, 50-18-1052, 50-25-1050, 50-48-1032, 50-57-1119, 53-31-1582 OK AC-67 OR CLE-322, 197010, AC-67 PA
Pennsylvania Home Improvement Contractor Registration Number; PAO10083 RI 18004, AF-09170 TN ACC1704, ACC1705, ACC1707, ACC1708,
ACC1709, ACC710, ACC1711 TX B00536, 4200 Buckingham Road Ste 150, Ft. Worth, TX 76115 — Dept of Public Safety, Private Security 5805 N.
Lamar Blvd, Austin 78752, ACR-1460 UT 8390557-6501 VA 11-7587, 11-7575, 11-7591, 11-7573, 11-7589, 11-7578, 2705147765 WA
JOHNSCS837N4, 19625 62nd Ave South, Ste C112 Kent, WA 98032 WV 050291.

See a comprehensive list of licenses on http://www.johnsoncontrols.com. California Customers Only: Upon completion of the installation of the
alarm system, the alarm company shall thoroughly instruct the purchaser in the proper use of the alarm system. Failure by the licensee, without legal
excuse, to substantially commence work within 20 days from the approximate date specified in the agreement when the work will begin is a violation
of the Alarm Company Act.

JOHNSON CONTROLS SECURITY SOLUTIONS CONFIDENTIAL AND PROPRIETARY BUSINESS

INFORMATION
Page 2 of 8

© JOHNSON CONTROLS 2019. ALL RIGHTS RESERVED.