1.3
1.4
1.5
1.6
1.7
O1150A-2
MEASUREMENT AND PAYMENT
encountered during the prosecution of the Work and until its final acceptance by the
Engineer, and for all risks of every description connected with the prosecution of
the work, except as provided herein, also for all expenses incurred in consequence
of the suspension of the work as herein authorized.
O1150A-1
SECTION 01150A
MEASUREMENT AND PAYMENT
PART 1 - GENERAL
1.1 DESCRIPTION
A.
For lump sum items, payment shall be made to the Contractor in accordance with
an accepted Progress Schedule and Schedule of Values on the basis of actual work
completed.
For unit-price items, payment shall be based on the actual amount of work accepted
and for the actual amount of materials in place, as shown by the final
measurements.
01100-2
ALTERNATES
including but not limited to section 15671 and all associated controls and electrical gear,
piping and appurtenances for a fully functioning HVAC system.
2.4 BID ALTERNATE C
This alternate shall consist of furnishing and installing the new Control Building Lobby
Offices Ductless Split System as shown on the drawings and specified herein, including
but not limited to section 15671 and all associated controls and electrical gear, piping
and appurtenances for a fully functioning HVAC system.
PART 3 - EXECUTION
01100-1
SECTION 01100
ALTERNATES
PART 1 - GENERAL
1.1 DESCRIPTION
A. Work Included:
1. Each Bidder shall be held fully responsible for examining the scope of the
Alternates generally defined herein and for recognizing any modifications to his
work caused by any Alternate
B. Alternate:
1. To enable the Owner to compare total costs where alternate materials and
methods might be used, an Alternate has been established as described in this
Section of these Specifications.
fps
ft.
gal.
gpd
gpm
IBR
in.
inter.
ISA
kva
kw
lb.
max.
MCB
MGD
Min.
NBS
NEC
NEMA
NEWWA
NPT
OS&Y
PCA
ppm
%
psi
psig
PVC
rpm
RUS
sf.
STL. W.G.
S.y.
TDH
USAS
USS GAGE
VC
WSP
Fed. Spec.
01070-2
ABBREVIATIONS & SYMBOLS
Feet Per Second
Feet
Gallons
Gallons Per Day
Gallons Per Minute
Horsepower
PART 1 - GENERAL
1.1 DESCRIPTION
A.
01070-1
SECTION 01070
ABBREVIATIONS & SYMBOLS
Where any of the following abbreviations are used in these Specifications, they
shall have the meaning set forth opposite each.
AASHTO
AC
ACI
ACP
AGA
AIC
AGMA
ATEE(IEEE)
AISC
amp
Amer. Std.
ANSI
API
ASA
ASCE
ASHRAE
01050-2
COORDINATION
coordinate their work with the instrumentation supplier by providing operating
sequences, input/out specifications with wiring diagrams for all equipment, and that
they shall review and comment on each others shop drawings to insure that all
interfaces are compatible.
1.3 CONTRACTOR'S USE OF PREMISES
A. Contractor shall have use of the premises within the limits shown on the Drawings
and as defined in the General Conditions for the performance of the Work and
Section 01010a — Summary of Work.
01050-1
SECTION 01050
COORDINATION
PART 1 - GENERAL
1.1 DESCRIPTION
A.
Contractor is required to work in close proximity to Owner's existing facilities. The
Contractor, under this Contract, will be responsible for coordinating construction
activities with Owner to ensure that services, facilities, and safe working conditions
are maintained.
3.4
3.5
01045-3
CUTTING, CORING AND PATCHING
Provide protection for existing equipment, utilities and critical areas against water
or other damage caused by drilling operation.
Slurry or tailings resulting from coring operations shall be vacuumed or otherwise
removed from the area following drilling. Slurry or tailings shall not be allowed to
enter floor drains.
Work area (e.g., adjacent walls, floors, ceilings, pipes, conduits, etc.) shall be
cleaned to remove splash residues from coring operation.
CUTTING
01045-2
CUTTING, CORING AND PATCHING
PART 3 - EXECUTION
