Agenda

01500-5
TEMPORARY FACILITIES AND CONTROLS

C. Water:

1.

Provide and maintain water for drinking and construction purposes as required
for the proper execution of the Work.

D. Sanitary Accommodations:

1.

2.

Provide and maintain sanitary accommodations for the use of the employees
of the General Contractor, subcontractors, and Engineer.

Sanitary accommodations shall meet the requirements of all local, State and
Federal health codes, laws and regulations.

END OF SECTION

13089K

01500-4
TEMPORARY FACILITIES AND CONTROLS

5. The General Contractor shall furnish, install, maintain and pay for adequate
temporary chemical type toilet accommodations, for all persons employed on
the work and located where approved by the Engineer. The accommodations
shall be in proper enclosures and in accordance with Municipal Ordinances
and shall be maintained in proper, safe and sanitary conditions and suitably
heated when requested.

6. Relocate temporary toilet facilities as required to facilitate the construction.

01500-3
TEMPORARY FACILITIES AND CONTROLS

2. Heating and Ventilation

1.

01500-2
TEMPORARY FACILITIES AND CONTROLS

PART 2 - PRODUCTS

2.1 MATERIALS
1. Electrical

01500-1

SECTION 01500

TEMPORARY FACILITIES AND CONTROLS

PART 1 - GENERAL

1.1

1.2

DESCRIPTION
A. Work Included:

1.

Provide and pay for all temporary applicable utilities required to properly
perform the Work at no additional cost to the Owner including the placement
and removal of the utilities.

Completely remove all temporary equipment and materials upon completion
of the Work and repair all damage caused by the installation of temporary
utilities.

01400-3
QUALITY CONTROL

PART 2 - PRODUCTS
Not Used

PART 3 - EXECUTION
Not Used

END OF SECTION

13089K

01400-2
QUALITY CONTROL

recommendations.

TESTING LABORATORY SERVICES

A. Owner will employ and pay for services of an Independent Testing Laboratory to
perform inspections, tests, and other services wherever an Independent Testing
Laboratory is required by individual specification sections listed in paragraph 1.2
above, unless otherwise indicated.

B. Services will be performed in accordance with requirements of governing
authorities and with specified standards.

01400-1

SECTION 01400

QUALITY CONTROL

PART 1 - GENERAL

1.1

1.2

1.3

1.4

1.5

1.6

1.7

REQUIREMENTS INCLUDED
General Quality Control.
Workmanship.
Manufacturer's Instructions.
Manufacturer's Certificates.
Manufacturer's Field Services.
Testing Laboratory Services.

™MOOW >

RELATED REQUIREMENTS
A. Section 01340 - Submittals: Submittal of Manufacturer's Instructions.
B. — Section 04200 - Masonry.

QUALITY CONTROL

01380-1

SECTION 01380

CONSTRUCTION PHOTOGRAPHS

PART 1 - GENERAL

1.1 DESCRIPTION
A. Work Included:

1. Pre-Construction Record: Contractor shall utilize digital photographs and
video to obtain a visual record of the project area; copies of same shall be
given to the Engineer and Owner.

2. Notify Engineer at least three (3) working days prior to photographing or
videoing the project area so Engineer may, at his option, observe.

01370-1

SECTION 01370

SCHEDULE OF VALUES

PART 1 - GENERAL

1.1 DESCRIPTION
A. Extent of Work: