01400-1
SECTION 01400
QUALITY CONTROL
PART 1 - GENERAL
1.1
1.2
1.3
1.4
1.5
1.6
1.7
REQUIREMENTS INCLUDED
General Quality Control.
Workmanship.
Manufacturer's Instructions.
Manufacturer's Certificates.
Manufacturer's Field Services.
Testing Laboratory Services.
™MOOW >
RELATED REQUIREMENTS
A. Section 01340 - Submittals: Submittal of Manufacturer's Instructions.
B. — Section 04200 - Masonry.
QUALITY CONTROL
A. Maintain quality control over suppliers, manufacturers, products, services, site
conditions, and workmanship, to produce work of specified quality.
WORKMANSHIP
A. Comply with industry standards except when more restrictive tolerances or
specified requirements indicate more rigid standards or more precise workmanship.
B. Perform work by persons qualified to produce workmanship of specified quality.
C. Secure products in place with positive anchorage devices designed and sized to
withstand stresses, vibration, and racking.
MANUFACTURERS' INSTRUCTIONS
A. Comply with instructions in full detail, including each step in sequence. Should
instructions conflict with Contract Documents, request clarification from Engineer
before proceeding.
MANUFACTURERS' CERTIFICATES
A. When required by individual Specifications Section, submit manufacturer's
certificate that products meet or exceed specified requirements.
MANUFACTURERS' FIELD SERVICES
A. When specified in respective Specification Sections, require supplier and/or
manufacturer to provide qualified personnel to observe field conditions, conditions
of surfaces and installation, quality of workmanship, start-up of equipment, test,
adjust and balance of equipment as applicable, and to make appropriate
recommendations.
B. Representative shall submit written report to Engineer listing observations and
13089K
