07900-2
JOINT SEALERS
1.8 WARRANTY
A.
Installer to provide five-year warranty to include coverage of installed sealants,
caulking and accessories which fail to achieve air tight and watertight seal, exhibit
loss of adhesion or cohesion, or do not cure.
PART 2 - PRODUCTS
2.1 MATERIALS
A.
D.
07900-1
SECTION 07900
JOINT SEALERS
PART 1 - GENERAL
1.1
1.2
1.3
1.4
1.5
1.6
1.7
SECTION INCLUDES
A. Preparing sealant substrate surfaces.
B. Sealant and backing.
RELATED SECTIONS
A. Section 01340 - Submittals
B. Section 01710 - Project Cleaning
C. Section 04200 - Unit Masonry
D. Section 07270 - Fire Stopping
REFERENCES
A. ASTM C920 - Specification for Elastomeric Joint Sealant
B. FS-TT-S-227 - Sealing Compound: Elastomeric Type, Multi-Component
0753 1-3
SINGLE-PLY EPDM ROOFING
END OF SECTION
13089K
0753 1-2
SINGLE-PLY EPDM ROOFING
1.7 ENVIRONMENTAL REQUIREMENTS
A. Proceed with roofing work when existing and forecasted weather conditions permit
work to be performed in accordance with manufacturer's recommendations and
warranty requirements.
07531-1
SECTION 07531
SINGLE-PLY EPDM ROOFING
PART 1 - GENERAL
1.1
1.2
1.3
1.4
1.5
1.6
SECTION INCLUDES
A. New Work on Existing Roofs.
Removal of existing roof system where required to install new items.
Single-ply EPDM fully adhered roofing system and flashing.
Metal Flashing
Concrete Walkway Pads.
AWN >
Re-issuance of the existing warranty after the work is complete
07270-3
FIRESTOPPING
C. Fill all annular spaces of penetrations in masonry and concrete with insulation
packing material and apply mortar on other approved sealing compound.
D. Install intumescent wrap around all plastic pipe and insulated pipe penetrating fire
rating assemblies.
E. Install sealant as required per manufacturer's instructions.
3.4 CLEANING
A. Clean work under provisions of Section 01710.
END OF SECTION
13089K
07270-2
FIRESTOPPING
PART 2 - PRODUCTS
2.1 MANUFACTURERS
™MOOW >
Gold Bond Building Products
United States Gypsum
3M Products
Hilti
Johns Manville
Or equal
2.2 MATERIALS
A.
The materials specified herein are the generic components of typical firestopping
systems. The components shall be as required by the manufacturer to provide a
complete firestopping system complying with the performance requirements
specified.
07270-1
SECTION 07270
FIRESTOPPING
PART 1 - GENERAL
1.1
1.2
1.3
1.4
1.5
1.6
1.7
SECTION INCLUDES
A. Firestopping for all new and existing penetrations in concrete and masonry walls,
floors and ceilings.
RELATED SECTIONS
A. Section 01050: Coordination
B. Section 01340: Submittals
C. Section 04200: Unit Masonry
D. Section 07900: Joint Sealers
E. Division 15: Mechanical
F. Division 16: Electrical
REFERENCES
06100-2
ROUGH CARPRENTRY
B. Hardware and fasteners in contact with pressure treated lumber shall be stainless
steel.
PART 3 - EXECUTION
3.1] TEMPORARAY BRACING
A. Provide and maintain, until such time as permanently built into the structure, all
temporary bracing for new openings, walls, door frames, sills, and other work
requiring bracing and which is not specified as being provided under other
SECTIONS of the specifications.
3.2 PROTECTION
06100-1
SECTION 06100
ROUGH CARPRENTRY
PART | - GENERAL
L.] SECTION INCLUDES
A. Temporary enclosures.
B. All rough lumber, including wood nailers, posts, plates, blocking, strapping, and
lumber bases for mechanical and electrical equipment
C. Rough hardware, such as nails, bolts, screws, clips, as required to install rough
carpentry work.
D. Lumber Preservatives
1.2 | REALTED SECTIONS
A. Section 01340 - Submittals
B. Section 04200 - Unit Masonry
C. Section 07531 — Single Ply EPDM Roofing
