06100-1
SECTION 06100
ROUGH CARPRENTRY
PART | - GENERAL
L.] SECTION INCLUDES
A. Temporary enclosures.
B. All rough lumber, including wood nailers, posts, plates, blocking, strapping, and
lumber bases for mechanical and electrical equipment
C. Rough hardware, such as nails, bolts, screws, clips, as required to install rough
carpentry work.
D. Lumber Preservatives
1.2 | REALTED SECTIONS
A. Section 01340 - Submittals
B. Section 04200 - Unit Masonry
C. Section 07531 — Single Ply EPDM Roofing
1.3 REFERENCES
A. American Wood Protection Association (AWPA) ul - Use Category System - User
Specification for Treated Wood.
14 QUALITY ASSURANCE
A. All lumber except as otherwise specified herein shall:
1. Benew, dressed 4 sides (S4S), clean, and free from warping and other defects.
2. Conform to U. S. Department of Commerce Simplified Practice
Recommendations R-16 for sizes and use Classifications.
3. Have a moisture content not exceeding 19 percent when delivered to the
project.
4. National Forest Products Association - "National Design Specification for
Wood Construction - 2005 including Design Values for Wood Construction".
1.5 DELIVERY, STORAGE, AND HANDLING
A. Store all materials in an elevated dry location, protected by waterproof coverings.
Do not store within the building until masonry, concrete, and other such wet work
has been completed and allowed to dry.
PART 2 - PRODUCTS
2.1 ROUGH HARDWARE
A. Expansion anchor and anchor bolts shall be as shown on the Drawings and as
follow indicated below:
1. Nailers and blocking in excess of 7/8 inch thick - 3/4-inch diameter
galvanized steel anchor bolts or expansion bolts, as applicable.
2. Secure other non-specified lumber with galvanized steel fasteners, of a type
most suitable for the application.
13089K
