Finance Committee

Technical Specifications FY2018 Paving Program

ITEM 417.20- COLD PLANING TRANSITIONS

A. SCOPE

This work shall consist of the removal of existing bituminous pavement the depth and limits

shown on the plans or as directed by the Engineer. Cold planning transitions are required to tie in
overlays with existing pavement.

For roadways which are being reclaimed this item shall only be used to pay for cold planing at
driveway tie-ins as directed by the Engineer.

Technical Specifications FY2079 Paving Programs

ITEM 417 - COLD PLANING OF BITUMINOUS SURFACES

A. SCOPE

This work shall consist of the removal of existing bituminous pavement between road edges, to
the depth shown on the plans or as ordered by the Engineer. Maximum depth will vary from 2.0”
to 3.5”, depending upon the type of the street.

B. MATERIALS AND CONSTRUCTION

Technical Specifications IF-¥2019 Paving Programa

ITEM 403.12 -HOT BITUMINOUS PAVEMENT, HAND METHOD
A. SCOPE

This work shall include paving using the hand method for driveways, curb patches, areas
between railroad crossings, areas where it is impractical to pave using machine method, as
shown on the plans, or as ordered by the Engineer. Hand method paving shall not be used where
machine method (Item 403.11) paving is required.

B. MATERIALS AND CONSTRUCTION

Technical Specitications FY2019 Paving Program

Contractor shall provide two container types. One shall be of sufficient size and quality to
contain 3 shovels full of asphalt. The other shall be of sufficient size and quality to contain a 6”
diameter core of varying thickness. Containers shall have an area for labeling.

Technical Speciticatione FY2019 Paving Program

ITEM 403.11 - HOT BITUMINOUS PAVEMENT (METHOD
SPECIFICATION), MACHINE METHOD

A. SCOPE

This work shall consist of furnishing and placing bituminous pavement including shim pavement
to the depth shown on the plans or ordered by the Engineer. Work shall also include obtaining
asphalt samples on behalf of the City for quality control testing.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Prograrit

ITEM 403.6 -PAVEMENT JOINT ADHESIVE
A. SCOPE

This work includes the installation of pavement joint adhesive in locations shown on the plans or
ordered by the Engineer.

B. MATERIALS AND CONSTRUCTION

Technical Specitications P¥2019 Paving Program

ITEM 306.110 - RECLAIMED STABILIZED BASE PROCESSED IN
PLACE, 10” DEEP

A. SCOPE

Technical Speciiications FY2019 Paving Prograi
ITEM 304.33 - CRUSHED AGGREGATE FOR SHOULDERS
A. SCOPE

This work shall consist of furnishing and placing crushed aggregate to raise the edge of the
roadway shoulders as shown on plans or directed by the Engineer.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

ITEM 203.113 — DRIVEWAY EXCAVATION AND REGRADE
A. SCOPE

This work includes removing asphalt and concrete driveway materials to subbase, regrading, and
placing new pavement in kind. This item will only be used on roadways which are being
reclaimed or as directed by the Engineer.

B. MATERIALS AND CONSTRUCTION

Technical Specitications FY2019 Paving Program

ITEM 203.112 -ROAD EXCAVATION AND REGRADE

A. SCOPE

This work includes repair to subgrade and regrading and replacing removed subgrade material
with pavement at specific locations as directed by the Engineer.

This item will only be used at locations identified by the Engineer. In other areas where
subgrade is exposed during milling, grading and compaction of disturbed subgrade will be
incidental to subsequent paving.

B. MATERIALS AND CONSTRUCTION