Sales Proposal For:
CITY OF NASHUA
Presented By:
LIBERTY INT'L TRKS OF NH
INTERNATIONAL”
Prepared For:
CITY OF NASHUA
John Stewart
PO Box 2019
Nashua, NH 03061-2019
(603)584 - 3565
July 20, 2020
Presented By:
LIBERTY INT'L TRKS OF NH
James C Ramsay
1400 S. WILLOW STREET
MANCHESTER NH 03103 -
(603)623-8873
AXLE CONFIG:
MISSION:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION,
AUTOMATIC:
CLUTCH:
AXLE, FRONT NON-DRIVING:
AXLE, REAR, SINGLE:
CAB:
TIRE, FRONT:
TIRE, REAR:
Model Profile
2021 HV507 SFA (HV507)
4X2
Requested GVWR: 39000. Calc. GVWR: 36220
Wheelbase: 165.00, CA: 90.00, Axle to Frame: 63.00
{Cummins L9 300} EPA 2017, 300HP @ 2000 RPM, 860 lb-ft Torque @ 1300
RPM, 2200 RPM Governed Speed, 300 Peak HP (Max)
{Allison 3500 RDS} 5th Generation Controls, Wide Ratio, 5-Speed with
Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor, with
80,000-Ib GVW and GCW Max, On/Off Highway
Omit Item (Clutch & Control)
{Dana Spicer |-160W} Wide Track, I|-Beam Type, 16,000-Ib Capacity
{Dana Spicer $23-190} Single Reduction, Hypoid Gearing, 23,000-Ib Capacity,
R Wheel Encs Gear Ratio: 5.57
Conventional, Day Cab
(2) 11R22.5 Load Range H HSC 3 (CONTINENTAL), 496 rev/mile, 68 MPH, All-
Position
(4) 11R22.5 Load Range H HDR2 (CONTINENTAL), 491 rev/mile, 75 MPH,
Drive
SUSPENSION, REAR, SINGLE:31,000-Ib Capacity, Vari-Rate Springs, with 4500-Ib Capacity Auxiliary Multileaf
PAINT:
Springs
Cab schematic 100WK
Location 1: 0311, Omaha Orange (Std)
Chassis schematic N/A
2 Proposal: 22478-01
INTERNATIONAL
1CAJ
1LLA
1WDS
IWEV
2AEU
3ACP
3WAJ
4091
4732
4AZA
4EBT
4EXU
4EXV
4LAG
4LGG
4SPA
4VKC
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
Base Chassis, Model HV507 SFA with 165.00 Wheelbase, 90.00 CA, and 63.00 Axle to
Frame.
AXLE CONFIGURATION {Navistar} 4x2
Notes
: Pricing may change if axle configuration is changed.
FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.866" x 3.622" x
0.437" (276.0mm x 92.0mm x 11.1mm); 456.0" (11582mm) Maximum OAL
BUMPER, FRONT Swept Back, Steel, Heavy Duty
FRAME EXTENSION, FRONT Integral; 20" ln Front of Grille
WHEELBASE RANGE 146" (370cm) Through and Including 195" (495cm)
AXLE, FRONT NON-DRIVING {Dana Spicer |-160W} Wide Track, I-Beam Type, 16,000-
lb Capacity
Notes
: Axle Lead Time is 52 Days
SUSPENSION, FRONT, SPRING Multileaf, Shackle Type, 16,000-Ib Capacity, Less
Shock Absorbers
SPRINGS, FRONT AUXILIARY Air Bag, Right Side Only, Driver Control
BRAKE SYSTEM, AIR Dual System for Straight Truck Applications
Includes
: BRAKE LINES Color and Size Coded Nylon
: DRAIN VALVE Twist-Type
: GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster
: PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel
: PARKING BRAKE VALVE For Truck
: QUICK RELEASE VALVE On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4
: SPRING BRAKE MODULATOR VALVE R-?7 for 4x2, SR-7 with relay valve for 6x4/8x6
DRAIN VALVE {Berg} with Pull Chain, for Air Tank
AIR BRAKE ABS {Bendix AntiLock Brake System} 4-Channel (4 Sensor/4 Modulator) Full
Vehicie Wheel Control System
AIR DRYER {Bendix AD-IP} with Heater
BRAKE CHAMBERS, REAR AXLE {Bendix EverSure} 30/30 Spring Brake
BRAKE CHAMBERS, FRONT AXLE {Bendix} 24 SqlIn
SLACK ADJUSTERS, FRONT {Gunite} Automatic
SLACK ADJUSTERS, REAR {Gunite} Automatic
AIR COMPRESSOR {Cummins} 18.7 CFM
AIR DRYER LOCATION Mounted Inside Left Rail, Back of Cab
3 Proposal: 22478-01
INTERNATIONAL’
Code
AWBX
4WDM
4wdJ
4XDL
4XDM
5710
5CAW
5PTB
6DGG
7BEU
7BKS
TWAZ
7WCM
7WDN
8000
8518
8541
8718
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
DUST SHIELDS, FRONT BRAKE for Air Cam Brakes
DUST SHIELDS, REAR BRAKE for Air Cam Brakes
AIR TANK LOCATION (2) : One Mounted Under Each Rail, Front of Rear Suspension,
Parallel to Rail
BRAKES, FRONT {Bendix Spicer ES-165-6X} Air S-Cam Type, Heavy Duty Fabricated
Spider, Fabricated Shoe, Single Anchor Pin, Size 16.5" X 6", 23,000-lb Capacity
BRAKES, REAR {Bendix Spicer ES-165-7X} Air S-Cam Type, Heavy Duty Fabricated
Spider, Fabricated Shoe, Single Anchor Pin, Size 16.5" X 7", 23,000-lb Capacity per Axle
STEERING COLUMN Tilting and Télescoping
STEERING WHEEL 4-Spoke; 18" Dia., Black
STEERING GEAR (2) {Sheppard M100/M80} Dual Power
DRIVELINE SYSTEM {Dana Spicer} 1710, for 4x2/6x2
AFTERTREATMENT COVER Aluminum
EXHAUST SYSTEM Single, Horizontal Aftertreatment Device, Frame Mounted Right Side
Under Cab, for Single Vertical Tail Pipe, Frame Mounted Right Side Back of Cab
TAIL PIPE (1) Turnback Type
EXHAUST HEIGHT 8' 10"
MUFFLER/TAIL PIPE GUARD (1) Aluminum
ELECTRICAL SYSTEM 12-Volt, Standard Equipment
Includes
: DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab
> HAZARD SWITCH Push On/Push Off, Located on instrument Panel to Right of Steering
Wheel
> HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever
> PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light
: STARTER SWITCH Electric, Key Operated
: STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector
: TURN SIGNAL SWITCH Self-Cancelling for Trucks, Manual Cancelling for Tractors, with
Lane Change Feature
: WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature (5 Pre-Set
Delays), Integral with Turn Signal Lever
: WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted
: WIRING, CHASSIS Color Coded and Continuously Numbered
CIGAR LIGHTER Includes Ash Cup
HORN, ELECTRIC (2) Disc Styie
POWER SOURCE Cigar Type Receptacle without Plug and Cord
4 Proposal: 22478-01
INTERNATIONAL?
8HAG
8MJU
8REA
8RMZ
8RPS
8THB
8THJ
8TNR
8VUL
8VZK
8WBW
8WGL
8WPH
8WPZ
8WRB
8WTL
BWW
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
ALTERNATOR {Leece-Neville AVI160P2013} Brush Type; 12 Volt 160 Amp. Capacity,
Pad Mount, with Remote Sense
BODY BUILDER WIRING Back of Day Cab at Left Frame or Under Sleeper, Extended or
Crew Cab at Left Frame; Includes Sealed Connectors for Tail/Amber Turn/Marker/ Backup/
Accessory Power/Ground and Sealed Connector for Stop/Turn
ELECTRIC TRAILER BRAKE/LIGHTS Accommodation Package to Rear of Frame; for
Separate Trailer Stop, Tail, Turn, Marker Light Circuits; Includes Electric Trailer Brake
accommodation package with Cab Connections for Mounting Customer Installed Electric
Brake Unit, Less Trailer Socket
BATTERY SYSTEM ({Fleeirite} Maintenance-Free, (3) 12-Volt 2850CCA Total, Top
Threaded Stud
2-WAY RADIO Wiring Effects; Wiring with 20 Amp Fuse Protection, Includes Ignition Wire
with 5 Amp Fuse, Wire Ends Heat Shrink and 10' Coil Taped io Base Harness
SPEAKERS (2) 6.5" Dual Cone Mounted in Both Doors, (2) 5.25" Dual Cone Mounted in
Both B-Pillars
RADIO AM/FM/WB/Clock/Bluetooth/USB [nput/Auxiliary Input
BACK-UP ALARM Electric, 102 dBA
AUXILIARY HARNESS 3.0’ for Auxiliary Front Head Lights and Turn Signals for Front Plow
Applications
BATTERY CABLES with 36” of Extra Length Coiled and Strapped Near Battery Box
BATTERY BOX Steel, with Plastic Cover, 18" Wide, 2-4 Battery Capacity, Mounted Left
Side Back of Cab
TURN SIGNALS, FRONT Dual Face, LED, Amber/Red, Mounted on Top of Fender, Used
with Standard Flush Mounted Front Turn Signal, Side Marker Lamps, Parking Lights and
Reflectors
JUMP START STUD Remote Mounted
WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed When
Park Brake Set and Wipers Left on for a Predetermined Time
CLEARANCE/MARKER LIGHTS (5) {Truck Lite} Amber LED Lights, Flush Mounted on
Cab or Sunshade
TEST EXTERIOR LIGHTS Pre-Trip Inspection will Cycle all Exterior Lamps Except Back-
up Lights
HEADLIGHTS ON W/WIPERS Headlights Will Automatically Turn on if Windshield Wipers
are turned on
STARTING MOTOR {Delco Remy 39MT} 12 Volt, Gear Reduced, with Thermal Over-
Crank Protection
INDICATOR, LOW COOLANT LEVEL with Audible Alarm
5 Proposal: 22478-01
approved budget. Specifically, Professional Engineer agrees to provide the following with each
request for payment:
1. Appropriate invoice forms. The forms shall include the project purchase order number,
a listing of personnel hours and billing rates, and other expenditures for which payment is
sought.
2. A progress report. The report shall include, for each monthly reporting period, a
description of the work accomplished, problems experienced, upcoming work, any extra
work carried out, and a schedule showing actual expenditures billed for the period,
cumulative total expenditures billed and paid to date under the contract, and a comparison
of cumulative total expenditures billed and paid to the approved budget.
The City of Nashua will pay for work satisfactorily completed by Professional Engineer. The City
of Nashua will pay Professional Engineer within 30 days of approval by the City of Nashua of the
submitted invoice forms and progress reports. The City of Nashua will make no payments until
the invoice forms and progress reports have been submitted and approved.
5. EFFECTIVE DATE OF CONTRACT. This contract shall not become effective until executed by
the City of Nashua.
6. NOTICES. All notices, requests, or approvals required or permitted to be given under this
contract shall be in writing, shall be sent by hand delivery, overnight carrier, or by United States
mail, postage prepaid, and registered or certified, and shall be addressed to:
CITY OF NASHUA REPRESENTATIVE: PROFESSIONAL ENGINEER REPRESENTATIVE:
Tim Cummings Nathaniel Fanning
Director of Economic Development Energy & Infrastructure
P: 603.589.3072 P: 781.285.2300 / E:nfanning@f-t.com
Any notice required or permitted under this contract, if sent by United States mail, shall be deemed
to be given to and received by the addressee thereof on the third business day after being deposited
in the mail. The City of Nashua or Professional Engineer may change the address or representative
by giving written notice to the other party.
IN WITNESS WHEREOF, the parties hereto have caused this contract to be signed and intend to be
legally bound thereby.
City of Nashua, NH (signature) (signature)
James W.Donchess, Mayor
(Printed Name and Title) (Printed Name and Title)
Date Date
AG 3 of 4
INTERNATIONAL’
Code
8WXD
8XAH
8XHD
8XHN
8XHR
9AAB
9AAE
SANG
SHAN
9HBM
9HBN
S9WBC
10060
10761
1OSLV
11001
12703
12849
12851
12EHU
12THT
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
ALARM, PARKING BRAKE Electric Horn Sounds in Repetitive Manner When Vehicle Park
Brake is "NOT" Set, with Ignition "OFF" and any Door Opened
CIRCUIT BREAKERS Manual-Reset (Main Panel) SAE Type Ill with Trip Indicators,
Replaces All Fuses
BATTERY DISCONNECT SWITCH 300 Amp, Disconnects Charging Circuits, Lacks with
Padlock, Cab Mounted
HORN, AIR Single Trumpet, Black, with Lanyard Pull Cord
POWER SOURCE, ADDITIONAL Auxiliary Power Outlet (APO) & USB Port, Located in
the Instrument Panel
LOGOS EXTERIOR Model Badges
LOGOS EXTERIOR, ENGINE Badges
HOCD, HATCH (01) for Servicing
INSULATION, UNDER HOOD for Sound Abatement
GRILLE Stationary, Chrome
INSULATION, SPLASH PANELS for Sound Abatement
FRONT END Tilting, Fiberglass, with Three Piece Construction, for WorkStar/HV
PAINT SCHEMATIC, PT-1 Single Color, Design 100
Includes
: PAINT SCHEMATIC ID LETTERS "WK"
PAINT TYPE Base Coat/Clear Coat, 1-2 Tone
PROMOTIONAL PACKAGE Government Silver Package
CLUTCH Omit Item (Clutch & Control)
ANTI-FREEZE Red, Extended Life Coolant; To -40 Degrees F/ -40 Degrees C, Freeze
Protection
BLOCK HEATER, ENGINE 120V/1000W, for Cummins ISB/B6.7/ISL/L9 Engines
Includes
: BLOCK HEATER SOCKET Recepiacle Type; Mounted below Drivers Door
PTO EFFECTS, ENGINE FRONT Less PTO Unit, Includes Adapter Plate on Engine Front
Mounted
ENGINE, DIESEL {Cummins L9 300} EPA 2017, 300HP @ 2000 RPM, 860 Ib-ft Torque
@ 1300 RPM, 2200 RPM Governed Speed, 300 Peak HP (Max)
FAN DRIVE {Horion Drivemaster} Direct Drive Type, Two Speed with Residual Torque
Device for Disengaged Fan Speed
lacludes
: FAN Nylon
6 Proposal: 22478-01
INTERNATIONAL’
12VAG
12VHJ
T2VXT
12VYL
12VYP
12WBR
12WZE
13AVG
13WAW
13WET
13WLP
13WUC
1SWVW
13WYH
13WYU
13XAL
14AHE
14SAL
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
RADIATOR Aluminum, Cross Flow, Front to Back System, 1228 Sqin, with 1167 Sqin
Charge Air Cooler
Includes
: DEAERATION SYSTEM with Surge Tank
: HOSE CLAMPS, RADIATOR HOSES Gates Shrink Band Type; Thermoplastic Coolant
Hose Clamps
: RADIATOR HOSES Premium, Rubber
AIR CLEANER Single Element, with Integral Snow Valve and In-Cab Control
FEDERAL EMISSIONS {Cummins L9} EPA, OBD and GHG Certified for Calendar Year
2020
THROTTLE, HAND CONTROL Engine Speed Control; Electronic, Stationary, Variable
Speed; Mounted on Steering Wheel
ACCESSORY WIRING, SPECIAL for Road Speed Wire Coiled Under Instrument Panel
for Customer Use
ENGINE CONTROL, REMOTE MOUNTED No Provision for Remote Mounted Engine
Control
FAN OVERRIDE Manual; with Electric Switch on Instrument Panel, (Fan On with Switch
On)
EMISSION COMPLIANCE Federal, Does Not Comply with California Clean Air Idle
Regulations
TRANSMISSION, AUTOMATIC {Allison 3500 RDS} 5th Generation Controls, Wide Raiio,
5-Speed with Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor,
with 80,000-lb GVW and GCW Max, On/Off Highway
OIL COOLER, AUTO TRANSMISSION {Modine} Water to Oil Type
TRANSMISSION SHIFT CONTROL Column Mounted Stalk Shifter
TRANSMISSION OIL Synthetic; 29 thru 42 Pints
ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series (RDS), General Purpose
Trucks, Construction, Package Number 223
NEUTRAL AT STOP OMIT
TRANSMISSION TCM LOCATION Located Inside Cab
SHIFT CONTROL PARAMETERS {Allison} 3000 or 4000 Series Transmissions,
Performance Programming
PTO LOCATION Customer Intends to Install PTO at Left Side of Transmission
AXLE, REAR, SINGLE {Dana Spicer S23-190} Single Reduction, Hypoid Gearing, 23,000-
lb Capacity, R Wheel Ends . Gear Ratio: 5.57
SUSPENSION, REAR, SINGLE 31,000-lb Capacity, Vari-Rate Springs, with 4500-Ilb
Capacity Auxiliary Multileaf Springs
7 Proposal: 22478-01
INTERNATIONAL’
TSWDG
16030
16BAM
16GDC
16HGH
I6HKT
16LJS
16RPV
16SEE
16SJW
16SNM
16VKB
16VSL
IGWBY
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
LOCATION FUELAVATER SEPARATOR Mounted Outside Left Rail, 41" Back of Cab
FUEL/WATER SEPARATOR {Racor 400 Series,} 12 VDC Electric Heater, Includes Pre-
Heater, with Primer Pump, includes Water-in-Fuel Sensor
FUEL TANK Top Draw, Non-Polished Aluminum, 26" Dia, 70 US Gal (265L), Mounted Left
Side, Under Cab
DEF TANK 7 US Gal (26L) Capacity, Frame Mounted Outside Left Rail, Under Cab
CAB Conventional, Day Cab
AIR CONDITIONER with Integral Heater and Defroster
GAUGE CLUSTER Base Level; English with English Speedometer and Tachometer, for
Air Brake Chassis, Includes Engine Coolant Temperature, Primary and Secondary Air
Pressure, Fuel and DEF Gauges, Oil Pressure Gauge, Includes 3 Inch Monochromatic
Text Display
GAUGE, OIL TEMP, AUTO TRANS for Allison Transmission
[P CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster
SEAT, DRIVER {National 2000} Air Suspension, High Back with Integral Headrest, Vinyl,
lsolator, 1 Chamber Lumbar, 2 Position Front Cushion Adjustment, -3 to +14 Degree Seat
Back Angle Adjust, Dual Shocks
SEAT, PASSENGER {National 2000} Air Suspension, High Back with integral Headrest,
Vinyl, Isolated, 1 Chamber Lumbar, 2 Position Front Cushion Adjustment, -3 to +14 Degree
Back Adjust
GRAB HANDLE, EXTERIOR Chrome, Towel Bar Type, with Anti-Slip Rubber Inserts, for
Cab Entry Mounted Left Side at B-Pillar
MIRROR, CONVEX, HOOD MOUNTED {Lang Mekra} (2) Right and Left Sides, Black,
Heated, 7.5" Sq.
MIRRORS (2) C-Loop, Heated, Black Heads and Arms, 7.5" x 14" Flat Glass, Includes 7.5"
x 7" Convex Mirrors, for 102" Load Width
Notes
: Mirror Dimensions are Rounded to the Nearest 0.5"
CAB INTERIOR TRIM Classic, for Day Cab
Includes
: CONSOLE, OVERHEAD Molded Plastic with Dual Storage Pockets, Retainer Nets and
CB Radio Pocket; Located Above Driver and Passenger
: DOME LIGHT, CAB Door Activated and Push On-Off at Light Lens, Timed Theater
Dimming, Integral to Overhead Conscle, Center Mounted
: SUN VISOR (2) Padded Vinyl; 2 Moveable (Front-to-Side) Primary Visors, Driver Side
with Toll Ticket Strap
WINDSHIELD Heated, Single Piece
ARM REST, RIGHT, DRIVER SEAT
8 Proposal: 22478-01
INTERNATIONAL’
Code
16WSK
16XCK
16XJN
16ZBT
26DUK
27DUK
28DUK
29PBA
29PBB
29WAP
29WAR
6O0AAG
60ACG
7382135423
7382135438
40128
40PVA
Vehicle Specifications July 20, 2020
2021 HV507 SFA (HV507)
Description
CAB REAR SUSPENSION Air Bag Type
WINDOW, MANUAL (2) and Manual Door Locks, Left and Right Doors
INSTRUMENT PANEL Flat Panel
ACCESS, CAB Steel, Driver & Passenger Sides, Two Steps per Door, for use with Day
Cab and Extended Cab
WHEEL, SPARE, DISC {Accuride 29169} 22.5x8.25 Rims, Powder Coat Steel, 5-Hand
Hole, 10-Stud, 285.75mm BC, Hub-Piloted, with .472" Thick Increased Capacity Disc
WHEELS, FRONT {Accuride 29169} DISC; 22.5x8.25 Rims, Powder Coat Steel, 5-Hand
Hole, 10-Stud, 285.75mm BC, Hub-Piloted, Flanged Nut, with .472" Thick Increased
Capacity Disc and Steel Hubs
WHEELS, REAR {Accuride 29169} DUAL DISC; 22.5x8.25 Rims, Powder Coat Steel, 5-
Hand Hole, 10-Stud, 285.75mm BC, Hub-Piloted, Flanged Nut, with .472" Thick Increased
Capacity Disc and Steel Hubs
PAINT IDENTITY, FRONT WHEELS Disc Wheels; with Vendor Applied Black Powder Coat
Paint
PAINT IDENTITY, REAR WHEELS Disc Wheels; with Vendor Applied Black Powder Coat
Paint
WHEEL GUARDS, FRONT {Accuride} for Metric Hub Piloted Wheels with Flanged
Mounting Nuts Mounted Between Hub and Wheel
WHEEL GUARDS, REAR {Accuride} for Metric Hub Piloted Wheels with Flanged Mounting
Nuts, Mounted Between Hub & Wheel and Between Dual Wheels
BDY INTG, REMOTE POWER MODULE Mounted Inside Cab Behind Driver Seat, Up to
6 Outputs & 6 Inputs, Max 20 amp per Channel, Max 80 amp Total; Includes 1 Switch Pack
with Latched Switches
BDY INTG, SWITCH, INTERLOCKED 2 Position Latched Rocker, Backlit, with "ON"
Indicator Mounted on Dash for 1; Auxiliary Load 20 amp Maximum; Output will disengage
when Vehicle Exceeds 30 MPH, Programmable; Power Available Only in "Ignition" or
“Accessory Position (requires 1 Remote Power Module output)
(4) TIRE, REAR 11R22.5 Load Range H HDR2 (CONTINENTAL), 491 rev/mile, 75 MPH,
Drive
(2} TIRE, FRONT 11R22.5 Load Range H HSC 3 (CONTINENTAL), 496 rev/mile, 68 MPH,
All-Position
Services Section:
WARRANTY Standard for HV507, HV50B, HV607 Models, Effective with Vehicles Built
July 1, 2017 or Later, CTS-2025A
SRV CONTRACT, EXT VEH COVERAGE {Navistar} To 84-Month/100,000 Miles (160,000
km), Excludes Extended Warranty for Engine and Transmission
9 Proposal: 22478-01
