Finance Committee

October 15" 2019
City of Nashua, N.H.
Attn: John Stewart
Dear Mr. Stewart,
Tenco Industries is pleased to offer you the following equipment for your consideration;
1. John, the additional cost for the Stainless Steel frame and leg kit for the 925 gallon Anti-
Ice unit is $4,920.00. The updated cost for each truck would be $111,877.00.
All prices and Freight are F.O.B. Barre, VT.
This Quote is valid for 60 days.

Thank you for the opportunity to quote,

Greg Utenay

8. Warranty

sremceane

A. Front plow and hitch assembly must carry a three (3} year
warranty from manufacturing defects.

- YES

8. Wing plow, hitch and tower must carry a three (3) year
warranty from manufacturing defects.

~ YES

C. Dump body, hydraulic pump and valves must carry a three
{3} year warranty from manufacturing defects.

- YES

#304SS BODY FOR STREET & PARKS DEPARTMENT BID

9. Bid Pricing:

ACKAGE

tem Description

Unit Price

Install Cost Total Price

HYDRAULICS AND CONTROLS

A. 4 P20 gear type crankshaft mounted front pump witha
Spicer driveline and end yokes shall be standard

1B. A 35 galion hydraulic oil tank with a sight gauge, filter - #304 SS Combination Hydraulic Tank
assembly, shut off valves and alt necessary control valves and Vaive Enclosure. ¥
required for operation as a plow/sander/pre-wet system shall
be included.
C. Spreaders shail be equipped with a Rexroth Basic CS550 - CERTIFIED POWER XDS

ground speed contro} or equivalent.

"G. The sheaves shall be a6” nominat size with extra deep rope
groove 1-%” axle with a greaseable brass bushing. The sheaves
shall be of a machined steel construction.

H. The wire rope shall be %” diameter x 8 x 25 construction
improved plow steel with double clamps, loop thimbles, and
| anchor shackles at each end.

t. The slide control cylinder shall be a 3” diameter bore x 18”
stroke double acting with 2” diameter nitrided pistan rod.

[ Wing Plow Hitch Mount

4. The wing control cylinder shall be a 3” diameter bore x 24”
stroke double acting with 2” diameter nitrided piston rod. This
cylinder is mounted to operate in conjunction with the wing
arms forming a two-point pivot through which the wing is
operated.

B. The push arm bracket shall be fabricated from a base tube
of HSS 6” x 6” « 4” x 3/8” vertical height. The wing arms attach
to %” thick double arm maunting ears carrying 1-%" diameter
grade 8 plated bolts with nylok nuts.

E - Bumper.

The bumper is designed to allow sufficient room for pump
mounting. The bumper plate shail be full width of the chassis
frarne and full depth of cheek plate assembly.

F. L set of heated LED plow lights with integral turn/park lights
shall be standard.

IFBLOGS-092719 6 Wheel Dume Truck Up-Fits

Page | 8

Nose Plow Hitch Frarne

‘A. The front plow hitch mast shall be of a fixed design.

B. Hitch Specifications:

Wing Plows For 6 Wheel Trucks

A. Wing plow shail be a right hand 11’ long trip edge plow with
%” moldboard, curb guards and non-trip arms.

8. [t shall include 2 mounting locations for a 1-1/2” pivet
{slider} bolt.

C. The pivot holes shall be reinforced %” plate washer welded
to the skin plate.

'D. The moldboard shall be fabricated with a 1” thick plate
nosepiece.

| E. The arm-attaching bracket shail be bolted in place and
adjustable in position.

F. Wing blades shall be punched on 12” center.

Nose Plows for 6 Wheel Truck

A. Astee!l 11‘ power angle trip edge plow with %” mold
board, no less than 40” high, punched to AASHO standards
12” on center with caster wheels shall be standard.

B. Plow shali be complete with a carbide cutting edge and
cover plate

C. Trip edges shail be punched to accept a 132” standard hi-
way punch cutting edge

D. The moldboard shall have 2 curb shoes (one each end of
cutting edge), each curb shoe shall not be less than 1-3/8”
thick.

E. 2 Caster wheels per plow shail be supplied.

1. Bodies shall be equipped with a safety braces.

J. A 10’ Stainless steel 8 cubic yard hydraulic V-box
spreader equipped with support legs shall be standard.
Swenson EV206 or similar. Equipped with a pre-wet system,
largest tanks available.

- 7.8 cufyd capacity

K. V box spreaders shall have a tap mounted spinner motor.

L. Bodies shall be equipped with a GI 500d coverall with in-
cab control.

- Donovan Bullet Electric Tarp