"G. The sheaves shall be a6” nominat size with extra deep rope
groove 1-%” axle with a greaseable brass bushing. The sheaves
shall be of a machined steel construction.
H. The wire rope shall be %” diameter x 8 x 25 construction
improved plow steel with double clamps, loop thimbles, and
| anchor shackles at each end.
t. The slide control cylinder shall be a 3” diameter bore x 18”
stroke double acting with 2” diameter nitrided pistan rod.
J. The slider shall consist of 2 base plate of 34” x 7” plate x the
height of the tower. The front wing pivot “Dee” attaches to the
Slider with a %” plate section the wing dee will be the “Safety
Trip” model having a 1-4” diameter grade 5 wing-mounting
_bolt with slotted hex nut and cotter pin,
K. The travel shall be 36” of vertical travel.
L. The crass tubes shall be two HSS sections which are
mounted horizontally to connect the front tower to the front
_hitch. The HSS section is 6” x 4” x 3/8” wall rectangular tubing.
{FB1005-092729 6 Wheel Dump Truck Up-fits
Page | 10
