Finance Committee

3. The issuance of a certificate of Substantial Completion by ENGINEER or any payment related thereof by OWNER;
4. Use or occupancy of the Work or any part thereof by OWNER;
5. Any acceptance by OWNER or any failure to do so;

6. Any review and approval of a Shop Drawing or Sample submittal or the issuance of a notice of acceptability by
ENGINEER;

7. Any inspection, test, or approval by others; or
8. Any correction of defective Work by OWNER.
6.20 /ndemnification

E. ENGINEER’s Review
1. ENGINEER will timely review and approve Shop Drawings and Samples in accordance with the schedule of Shop
Drawings and Sample submittals acceptable to ENGINEER. ENGINEER’s review and approval will be only to
determine if the items covered by the submittals will, after installation or incorporation in the Work, conform to
the information given in the Contract Documents and be compatible with the design concept of the completed
Project as a functioning whole as indicated by the Contract Documents.

ENGINEER prompt written notice if CONTRACTOR believes that any significant changes in the Work or variations from
the Contract Documents have been caused thereby or are required as a result thereof. If ENGINEER determines that a
change in the Contract Documents is required because of the action taken by CONTRACTOR in response to such an
emergency, Change Order will be issued.

6.17 Shop drawings and Samples

of OWNER or ENGINEER or ENGINEER’S Consultant, or anyone employed by any of them, or anyone for whose acts any
of them may be liable, and not attributable, directly or indirectly, in whole or in part, to the fault or negligence of
CONTRACTOR or any Subcontractor, Supplier, or other individual or entity directly or indirectly employed by any of
them). CONTRACTOR’s duties and responsibilities for safety and for protection of the Work shall continue until such

neatly recorded as they occur by means of details and notes. No construction work shall be concealed until it has been
inspected, approved, and recorded. The As-built marked prints will be jointly inspected for accuracy and completeness
by the ENGINEER'S representative and a responsible representative of the CONTRACTOR prior to submission of the
monthly pay estimate. Failure to keep the As-built marked prints on a current basis shall be sufficient justification to

1. CONTRACTOR shall confine construction equipment, the storage of materials and equipment, and the
operations of workers to the Site and other areas permitted by Laws and Regulations, and shall not unreasonably
encumber the Site and other areas with construction equipment or other materials or equipment. CONTRACTOR
shall assume full responsibility for any damage to any such land or area, or to the OWNER or occupant thereof, or
of any adjacent land or areas resulting from the performance of the Work.

1. Each bid submitted to any officer, department, board or commission for the construction of any public
work or improvement must include:

D. CONTRACTOR shall comply with all local laws, ordinances, and statutes, all provisions of the Revised Statutes
Annotated, all provisions of the federal Davis-Bacon Act for projects with federal funding, and all regulations
promulgated under either statute. Copies of the "City of Nashua Prevailing Wage Rates for Public Works", as
determined by U.S. Department of Labor and "General Wage Determinations," as determined by the U.S. Department

provided in paragraph 5.06, the agreement between the CONTRACTOR and the Subcontractor or Supplier will contain
provisions whereby the Subcontractor or Supplier waives all rights against OWNER, CONTRACTOR, ENGINEER,
ENGINEER’s Consultants, and all other individuals or entities identified in the Supplementary Conditions to be listed as
insured or additional insured (and the officers, directors, partners, employees, agents, and other consultants and

E. ENGINEER’s Cost Reimbursement: ENGINEER will record time required by ENGINEER and ENGINEER’s Consultants
in evaluating substitute proposed or submitted by CONTRACTOR pursuant to paragraphs 6.05.A.2 and 6.05.B and in
making changes in the Contract Documents (or in the provisions of any other direct contract with OWNER for work on
the Project) occasioned thereby. Whether or not ENGINEER approves a substitute item so proposed or submitted by
CONTRACTOR, CONTRACTOR shall reimburse OWNER for the charges of ENGINEER and ENGINEER’s Consultants for