Agenda

Technical Specifications FY2019 Paving Program

ITEM 618.7 - FLAGGERS
A. SCOPE

This work shall consist of furnishing qualified flaggers, as required to direct traffic through or
around the Work as ordered by the Engineer.

B. MATERIALS AND CONSTRUCTION

The Contractor shall supply qualified flaggers as per the latest approved NHDOT Standard
Specifications for Road and Bridge Construction. Daily coverage needs to be approved by the
Engineer.

OF MEASUREMENT AND PAYMENT

Technical Specifications FY2019 Paving Program

ITEM 618.6 - UNIFORMED OFFICERS
A. SCOPE

This work shall consist of furnishing uniformed officers, with or without vehicles, as required to
direct traffic through or around the Work as ordered by the Engineer.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

ITEM 616.7 - LOCAL TRAFFIC LOOPS 6’ X 50’ (2-4-2 TURN)

A. SCOPE

This work consists of furnishing all labor, materials and equipment necessary to install the
quadruple loop detectors as directed by the Engineer.

B. MATERIALS AND CONSTRUCTION

This item shall include all labor, materials and equipment necessary to install new quadruple
loop detectors 2-4-2 turn, in conjunction with the paving program. Loops shall be installed in the
pavement surface prior to final overlay or top course.

Technical Specifications FY2019 Paving Program

ITEM 609.811 - BITUMINOUS CURBING

A. SCOPE

This work shall consist of constructing bituminous curbs as shown on the plans or as ordered by
the Engineer. Work includes all furnishing, placing, and cleanup work associated with the
installation of the curbing.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

ITEM 609.5 -RESET GRANITE CURB
A. SCOPE

This work shall consist of removal, stockpiling and resetting granite curb as shown on the
drawings or as directed by the Engineer. Furnishing and placing all materials required for
resetting granite curb shall be included.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

ITEM 609.01 - GRANITE CURBING
A. SCOPE

This work shall consist of constructing curb as shown on the plans or as ordered by the Engineer.
Work includes furnishing, placing, and cleanup work associated with the installation of the curb.
Curb shall be installed on a properly graded, compacted bed of crushed gravel subgrade.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

ITEM 604.47 - DROP AND PLATE CASTING
A. SCOPE

This work consists of removing existing manhole casting, removing brick and mortar supporting
the casting, plating the hole over the structure, and backfilling the hole. Excavation, plate
removal, and final adjustment to proposed grade will be covered under Items 604.45, Item
604.46, and Item 604.4 as determined by the Engineer.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

Bridge Construction. The most stringent specification shall apply unless otherwise directed by
the Engineer.

C. MEASUREMENT AND PAYMENT
Payment for replacing existing castings shall be at the contract unit price specified for each. This
payment shall include all materials, labor, equipment, and all else needed to complete the work

under this item.

Technical Specifications FY2019 Paving Program

ITEM 604.46 — REPLACE CASTING
A. SCOPE

This work consists of replacing triangular, small diameter, and broken manhole frames and
covers, and catch basin frames and grates as shown on the drawings or as directed by the
Engineer. Any repair needed to the existing structure within the 12 inches below the bottom of
the casting shall be included and performed under this item. Any further repair needed to the
existing structure shall be performed under Item 604.4.

B. MATERIALS AND CONSTRUCTION

Technical Specifications FY2019 Paving Program

Contractor shall record the number and location of castings adjusted for each street. Payment is
contingent upon submittal of quantities in a per structure, and per street format.

14