Technical Specifications r¥Y2019 Paving Program
Contractor shall record the square yards of cold planed area for each street. Payment is
contingent upon submittal of quantities in a per street format.
This item will be measured by the Square Yard. Payment for this item shall be at the contract
unit price per Square Yard. This payment shall also include all materials, labor, equipment, and
all else needed to complete the work under this item.
11
Technical Specifications FY2018 Paving Program
ITEM 417.20- COLD PLANING TRANSITIONS
A. SCOPE
This work shall consist of the removal of existing bituminous pavement the depth and limits
shown on the plans or as directed by the Engineer. Cold planning transitions are required to tie in
overlays with existing pavement.
For roadways which are being reclaimed this item shall only be used to pay for cold planing at
driveway tie-ins as directed by the Engineer.
Technical Specifications FY2079 Paving Programs
ITEM 417 - COLD PLANING OF BITUMINOUS SURFACES
A. SCOPE
This work shall consist of the removal of existing bituminous pavement between road edges, to
the depth shown on the plans or as ordered by the Engineer. Maximum depth will vary from 2.0”
to 3.5”, depending upon the type of the street.
B. MATERIALS AND CONSTRUCTION
Technical Specifications IF-¥2019 Paving Programa
ITEM 403.12 -HOT BITUMINOUS PAVEMENT, HAND METHOD
A. SCOPE
This work shall include paving using the hand method for driveways, curb patches, areas
between railroad crossings, areas where it is impractical to pave using machine method, as
shown on the plans, or as ordered by the Engineer. Hand method paving shall not be used where
machine method (Item 403.11) paving is required.
B. MATERIALS AND CONSTRUCTION
Technical Specitications FY2019 Paving Program
Contractor shall provide two container types. One shall be of sufficient size and quality to
contain 3 shovels full of asphalt. The other shall be of sufficient size and quality to contain a 6”
diameter core of varying thickness. Containers shall have an area for labeling.
Technical Speciticatione FY2019 Paving Program
ITEM 403.11 - HOT BITUMINOUS PAVEMENT (METHOD
SPECIFICATION), MACHINE METHOD
A. SCOPE
This work shall consist of furnishing and placing bituminous pavement including shim pavement
to the depth shown on the plans or ordered by the Engineer. Work shall also include obtaining
asphalt samples on behalf of the City for quality control testing.
B. MATERIALS AND CONSTRUCTION
Technical Specifications FY2019 Paving Prograrit
ITEM 403.6 -PAVEMENT JOINT ADHESIVE
A. SCOPE
This work includes the installation of pavement joint adhesive in locations shown on the plans or
ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
Technical Specitications P¥2019 Paving Program
ITEM 306.110 - RECLAIMED STABILIZED BASE PROCESSED IN
PLACE, 10” DEEP
A. SCOPE
Technical Speciiications FY2019 Paving Prograi
ITEM 304.33 - CRUSHED AGGREGATE FOR SHOULDERS
A. SCOPE
This work shall consist of furnishing and placing crushed aggregate to raise the edge of the
roadway shoulders as shown on plans or directed by the Engineer.
B. MATERIALS AND CONSTRUCTION
Technical Specifications FY2019 Paving Program
ITEM 203.113 — DRIVEWAY EXCAVATION AND REGRADE
A. SCOPE
This work includes removing asphalt and concrete driveway materials to subbase, regrading, and
placing new pavement in kind. This item will only be used on roadways which are being
reclaimed or as directed by the Engineer.
B. MATERIALS AND CONSTRUCTION
