Division 9 — Construction Specifications
Legacy Playground at Labine Park
As Amended per Addendum # 2 issued March 24, 2016
ITEM ‘F’ - ENGINEERED WOOD CHIPS
A. SCOPE
This work shall consist of installation of engineered wood chips at the location(s) shown on the
layout plan per the detail of the plan set provided or as ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
Gamehme;
PART 5 - INSTALLATION (Continued)
ADA Rolled - This is the type of edge to meet the requirements of ASTM 1951, Specifications
for Determination of Accessibility of Surface Systems Under and Around Playground Equipment.
The rolled edge will require additional materials in order to provide adequate ADA Wheelchair
access. The total linear feet of the pad will need to be provided if the whole site is to be ADA
compliant.
PART 5 - INSTALLATION:
Weather Conditions. - Because the polyurethane agents are moisture or heat sensitive, the
nighttime temperatures must be above 40 degrees with daytime temperatures around 50
degrees. These temperatures must be consistent for several days before and after the poured
rubber installation period. Complying with these weather conditions will prevent poured rubber
from freezing which prevents proper curing.
Gamelhme;
PART 3 -SUB-BASE TYPES & DETAILS (Continued)
Stone Graduation U.S. Sieve Percent Passing
1" 100
3/4" 90 - 100
No. 4 35 - 60
No. 30 10- 30
No. 200 2-9
ie |
PART 2 - MATERIAL DATA (Continued)
Colors - The color of GT Impax recycled poured rubber surfacing will be indicated on plans.
Owner or owner's representative will be responsible for selecting standard blends. Selection of
either standard color blends or custom color blends must be made at time quotation is being
requested. EPDM/TPV colors are available in 100% black and a variety of colors. Ask your
GameTime representative for available color combinations.
PSI and minimum % elongation @ break of 140%.
IPEMA Certification: Manufacturer must provide proof of certification. “In the interest of
public playground safety, IPEMA provides an independent laboratory which validates a
manufacturer's certification of conformance to ASTM F1292-04. A list of current validated
products, their thickness and critical heights may be viewed at www.ipema.org.”
Submittal Details:
Poured in Place
Product Specification
PART 1 - GENERAL
Work Details:
This work includes furnishing and installing GT Impax recycled poured rubber surfacing.
Division 9 — Construction Specifications
Legacy Playground at Labine Park
As Amended per Addendum # 2 issued March 24, 2016
3.03
3.04
Surface Preparation: Using a brush or short nap roller, aoply primer to the substrate
perimeter and any adjacent vertical barriers (such as playground equipment) at the rate
of 300 ft2/gal.
INSTALLATION
Division 9 — Construction Specifications
Legacy Playground at Labine Park
As Amended per Addendum # 2 issued March 24, 2016
1.08
WARRANTY
Playground surface shall maintain required impact attenuation characteristics and be
guaranteed against defects in workmanship and materials for a period of no less than five
years from date of completion of work. Maintenance requirements must be maintained
for duration of warranty period.
PART 2 — Products
A.
2.01
2.02
Division 9 — Construction Specifications
Legacy Playground at Labine Park
As Amended per Addendum # 2 issued March 24, 2016
oO
Ow
T~TA™M™OANBPer
1.04
w
1.05
1.06
1.07
ASTM D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated
Floor Surfaces as Measured by the James Machine.
ASTM D2859 Standard Test Method for Flammability of Finished Textile Floor Covering
Materials.
