Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
6.06 FIELD QUALITY CONTROL
A. Provide in accordance with Division 01 General Requirements.
6.07 STARTUP & COMMISSIONING
A. Provide in accordance with Division 01 General Requirements.
6.08 CLOSEOUT ACTIVITIES
A. Provide in accordance with Division 01 General Requirements.
END OF SECTION
COMMUNICATIONS
WOODARD & CURRAN 27 00 00-9
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
L. Cables shall be labeled using color labels on both ends with identifiers in
accordance with EIA TIA/EIA-606-A.
6.02 TERMINATIONS
A. Data Riser: Terminate fiber strands using the appropriate ST/SC connectors.
B. Ground patch panels via a bond connection to the appropriate communications
grounding busbar.
6.03 LABELING REQUIREMENTS
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
E.
Terminate all cables at the origination and outlet end of all cables. Tag all cables
at the terminal block end to designate the locations of the outlets. All cables shall
be bundled neatly, tie-wrapped and dressed appropriately.
Obtain all permits, pay all fees and provide all materials and labor necessary for
interfacing with utility equipment to install data or internet service.
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
E.
3. Unit shall be Cisco model ASA5506-K9 or approved equal.
4. Provide Cisco model ASA5506-RACK-MNT rack mounting unit
5. Provide Tofino Xenon Xe-02-00-T1-T1-T-DD-Z9-000V for use in main
panel.
6. Provide initial year of all security services, subscriptions and
documentation for transfer of registration if necessary.
Rack Mounted Uninterruptable Power Supply (UPS)
1. Provide one (1) UPS designed to bolt to the equipment rack assembly.
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
b. Modules shall be labeled in front with room location number.
C. Modules shall be color coded “YELLOW” to match SCADA
cables.
C. Rack Mounted Ethernet Switch
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
1. Furnish and install CAT6 four pair, 24 AWG annealed copper, UTP cables
with PVC jackets at all locations indicated on the Drawings.
2. All cables shall be "YELLOW?” in color.
3. All cables shall be terminated and tested at the equipment rack, and at the
opposite termination point.
H. SCADA Fiber Optic Cable
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
C.
E.
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
1.03 ADMINISTRATIVE REQUIREMENTS
A. Coordination, Sequencing, and Scheduling: per Division 01 General
Requirements.
1.04 SUBMITTALS
A. Submit in accordance with the Division 01 General Requirements.
A. Provide manufacturer's product data, test reports, and materials certifications.
B. Submit a complete master wiring diagram engineering drawing of the system with
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
SECTION 27 00 00
COMMUNICATIONS
PART 1 - GENERAL
1.01 SUMMARY
A. Furnish, install, test and make ready for operation; complete data communications
system as specified herein and as shown on the Drawings. The data system shall
include but are not limited to the following:
Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH
This page intentionally left blank
WIRING DEVICES
WOODARD & CURRAN 26 27 26-8
