January 11,2011. The New Hampshire Public Utilities Commission approved the Merger
Agreement on November 23, 2011, concluding that “the transaction is in the public interest and
will not have an adverse effect on rates, terms, service, or operation of the utilities.”
V2 PENNICHUCK®
PENNICHUCK CORPORATION
25 Walnut Street
Nashua, New Hampshire 03060
PROXY STATEMENT
2022 Annual Meeting of Sole Shareholder
To be Held on Saturday, May 7, 2022, at 9:00 a.m. at
Pennichuck’s Distribution Facility, 16 Daniel Webster Highway, Merrimack, NH
V2 PENNICHUCK®
PENNICHUCK CORPORATION
25 Walnut Street
Nashua, New Hampshire 03060
NOTICE OF ANNUAL MEETING OF SOLE SHAREHOLDER
To be Held on Saturday, May 7, 2022, at 9:00 a.m. at
Pennicbuck’s Distribution Facility, 16 Daniel Webster Highway, Merrimack, NH
To the City of Nashua, New Hampshire, in its capacity as the Sole Shareholder of Pennichuck
Corporation:
PENNICHUCK:* 25 WALNUT STREET
PO BOX 428
NASHUA, NH 03061-0428
(603) 882-5191
FAX (603) 913-2305
VIA HAND DELIVERY WWW.PENNICHUCK COM
March 30, 2022
Ms. Lori Wilshire, President
Board of Aldermen
City of Nashua
229 Main Street
Nashua, NH 03060
Dear President Wilshire:
D. Lawn Seed:
1. Grass Seed: Provide fresh, clean, new-crop seed complying with tolerance for
purity and germination established by Official Seed Analysis of North America.
Provide seed mixture composed of grass species, proportions with maximum
percentages of purity and germination, and a minimum percentage of weed
seed, as specified.
¢ 45% Turf Type Tall Fescue
¢ 20% Kentucky Bluegrass
* 20% Creeping Red Fescue
¢ 15% Perennial Ryegrass
Sow at rate of 6-7 Ibs. per 1000 square feet.
SECTION 02920
LOAMING AND SEEDING
PART 1 —- GENERAL
1.01 DESCRIPTION OF WORK:
A. This section covers all labor, materials, and equipment necessary to do all loaming,
seeding and related work for miscellaneous areas disturbed by roadway and sidewalk
construction and as herein specified.
Note: Loaming and seeding for miscellaneous areas disturbed by roadway and
sidewalk construction is subsidiary to the sidewalk items of work.
1.02 RELATED WORK:
A. Section 02300 - EARTHWORK
B. Section 02370 — EROSION CONTROL
3.07 CURBING:
A. The Contractor shall install curbing in accordance with the Construction
Requirements as specified in NHDOT Section 609.
3.08 SIDEWALKS:
A. The Contractor shall install sidewalks in accordance with the Construction
Requirements as specified in NHDOT Section 608.
3.09 PAVEMENT MARKINGS:
C. Final rolling of the top course or surface treatment pavement shall be performed by a
steel wheel roller weighing not less than 285 pounds per inch width of tread at a mix
temperature and time sufficient to allow for final smoothing of the surface and
thorough compaction.
Engineer, the Contractor shall remove the temporary pavement and install or regrade
the sub-base for installation of permanent pavement.
3.04 PERMANENT BITUMINOUS PAVEMENT:
A. The bituminous paving mixture, equipment, methods of mixing and placing, and the
precautions to be observed as to weather, condition of base, etc., shall be in
accordance with NHDOT Standard Specifications Section 401. The permanent
pavement patch shall be constructed as detailed on the plans.
B. BASE COURSE AND BINDER COURSE PAVEMENT:
F. The Tack Coat shall be considered subsidiary to the pavement items of work.
2.03 CURBING:
A. Curbing shall conform to the requirements of NHDOT Standard Specifications 609,
Items 609.01 or Item 609.02 as detailed on the plans.
2.04 SIDEWALKS:
A. Sidewalks shall conform to the requirements of NHDOT Standard Specifications
608, Items 608.12 or Item 608.24 as detailed on the plans.
2.05 PAVEMENT MARKINGS:
