Agenda

TABLE OF CONTENTS
INSTRUCTIONS TO BIDDERS

DIVISION 2
INFORMATION FOR BIDDERS

Certificates of Liability and Workmen’s Compensation Insurance must be filed
by the successful bidder prior to commencement of work. Liability limits are as
follows:

General Liability: $1,000,000 per occurrence; $2,000,000 aggregate
Automobile Liability: $1,000,000 combined single limit
Coverage must include all owned, non-owned and
hired vehicles.

City of Nashua must be named as an additional insured on all liability
certificates.

Workers’ Compensation: Per NH State Statute
($100,000/$500,000/$100,000)

participating in the project. You or your representatives are required to
attend this meeting.

Beginning Monday, February 29, 2016, bid documents will be available
electronically from the City website: www.nashuanh.gov, under Services, Bid
Opportunities; Current Bids; (Refer to Document IFB0651-033116).

Please note paper copies will not be available. No bid documents are
available at the Central Purchasing.

The timeline for this project is:

(52) THE CITY OF NASHUA ‘The Cate City’

Financial Services

Purchasing Department

February 23, 2016
INVITATION TO BID
Legacy Playground at Labine Park
1FB0651-033116

Gamehme;

PART 5 - INSTALLATION (Continued)

ADA Rolled - This is the type of edge to meet the requirements of ASTM 1951, Specifications
for Determination of Accessibility of Surface Systems Under and Around Playground Equipment.
The rolled edge will require additional materials in order to provide adequate ADA Wheelchair
access. The total linear feet of the pad will need to be provided if the whole site is to be ADA
compliant.

PART 5 - INSTALLATION:

Weather Conditions. - Because the polyurethane agents are moisture or heat sensitive, the
nighttime temperatures must be above 40 degrees with daytime temperatures around 50
degrees. These temperatures must be consistent for several days before and after the poured
rubber installation period. Complying with these weather conditions will prevent poured rubber

from freezing which prevents proper curing.

Gamelhme;

PART 3 -SUB-BASE TYPES & DETAILS (Continued)

Stone Graduation U.S. Sieve Percent Passing

1" 100
3/4" 90 - 100
No. 4 35 - 60
No. 30 10- 30
No. 200 2-9

ie |

PART 2 - MATERIAL DATA (Continued)

Colors - The color of GT Impax recycled poured rubber surfacing will be indicated on plans.
Owner or owner's representative will be responsible for selecting standard blends. Selection of
either standard color blends or custom color blends must be made at time quotation is being
requested. EPDM/TPV colors are available in 100% black and a variety of colors. Ask your
GameTime representative for available color combinations.

PSI and minimum % elongation @ break of 140%.

IPEMA Certification: Manufacturer must provide proof of certification. “In the interest of
public playground safety, IPEMA provides an independent laboratory which validates a
manufacturer's certification of conformance to ASTM F1292-04. A list of current validated
products, their thickness and critical heights may be viewed at www.ipema.org.”

Submittal Details: