Agenda

Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH

2. Coordinate with all local utility companies and make all installations for
their services in accordance with all utility company requirements.

3. Any changes shall be done at the Contractor expense.

4. Where lighting fixtures and other electrical items are shown in conflict
with locations of structural members and mechanical or other equipment,
furnish and install all required supports and wiring to clear the
encroachment for a complete installation.

Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH

C.

Drawings shall identify the specific equipment and material being supplied; the
quantity being supplied; and all accessories, dimensions, descriptions, mounting
and connection details, wiring diagrams, elementary control diagrams, equipment
interface diagrams and any other information necessary to determine compliance
with the plans and specifications. Fabrication and installation shall be in
accordance with the approved Shop Drawings.

Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH

4. All utility company and municipal back charges shall be the responsibility
of the Contractor. Cost of electricity shall be borne by the Contractor until
substantial completion as determined by the Owner.

1.03 COORDINATION OF WORK

A.

The electrical work shall be coordinated with the work of other trades to prevent
interferences and so that the progress in construction of the building will in no
way be retarded.

Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH

1. Electrical equipment, materials, installation and workmanship shall
comply with all state and local building codes, safety and fire law
regulations at the location of the Work and shall conform to the latest
edition of the applicable codes and standards of the organizations listed:

a. NATIONAL ELECTRICAL CODE (NEC)
b. UNDERWRITERS’ LABORATORIES (UL)

c. INSTITUTE OF ELECTRICAL AND _ ELECTRONICS
ENGINEERS (IEEE C2)

Project Number: 228730 WWTE SCADA Upgrades
Issue Date: August 2017 Nashua, NH

SECTION 26 05 00

COMMON WORK RESULTS FOR ELECTRICAL

PART 1 - GENERAL
1.01 DESCRIPTION OF WORK

A. The Electrical Contactor shall provide the labor, tools, equipment, and materials
necessary to furnish, install and test all electrical Work in accordance with the
Drawings and as specified herein.

B. Provide the services of the local Electrical Utility companies to provide electrical
services, cable, and related appurtenances as shown on the Drawings

This page intentionally left blank

Notice of Completion (Form C-00 65 18)

Project: Owner: Owner's Contract No.:
Contract: Date of Contract:
Contractor:

This NOTICE of Completion applies to:
oO All Work under the Contract Documents: oO The following specified portions:

Date of final Completion

This page intentionally left blank

Based on EJCDC No. C-625 (2002 Edition) Page 1 of 1
Prepared by the Engineers’ Joint Contract Documents Committee and endorsed by the
Associated General Contractors of America and the Construction Specifications Institute.

Notice of Substantial Completion (C-00 65 15)

Project: Owner: Owner's Contract No.:
Contract: Date of Contract:
Contractor:

This NOTICE of Substantial Completion applies to:
oO The following Systems, Equipment or specified portions Ol: All Work under the Contract Documents

Date of Substantial Completion for above

The following documents are attached to and made part of this Notice.

Submitted by Contractor Date

This page intentionally left blank