INTERNATIONAL?
Prepared For:
CITY OF NASHUA
John Stewart
PO Box 2019
Nashua, NH 03061-2019
(603)584 - 3565
September 08, 2021
Presented By:
ALLEGIANCE TRUCKS
James C Ramsay
1400 S WILLOW ST.
MANCHESTER NH 03103 - 4024
(800)562-3814
AXLE CONFIG:
MISSION:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION,
AUTOMATIC:
CLUTCH:
AXLE, FRONT NON-DRIVING:
AXLE, REAR, TANDEM:
CAB:
TIRE, FRONT:
TIRE, REAR:
SUSPENSION, REAR,
TANDEM:
PAINT:
Model Profile
2021 HV607 SBA (HV607)
6X4
Requested GVWR: 58000. Calc. GVWR: 0. Calc. GCWR: 0
Wheelbase: 199.00, CA: 131.90, Axle to Frame: 81.00
{Cummins L9 330} EPA 2021, 330HP @ 2200 RPM, 1000 Ib-ft Torque @ 1200
RPM, 2200 RPM Governed Speed, 330 Peak HP (Max)
{Allison 3000 RDS} 5th Generation Controls, Close Ratio, 6-Speed with Double
Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor, with
80,000-lb GVW and GCW Max, On/Off Highway
Omit Item (Clutch & Control)
{Dana Spicer |-160W} Wide Track, I|-Beam Type, 16,000-Ib Capacity
{Meritor MT-40-14X-4DER} Single Reduction, 40,000-lb Capacity, .433"(11mm)
Wall Housing Thickness, Driver Controlled Locking Differential in Rear-Rear
Axle, R Wheel Ends Gear Ratio: 5.86
Conventional, Day Cab
(2) 315/80R22.5 Load Range L HSC 3 (CONTINENTAL), 481 rev/mile, 68 MPH,
All-Position
(8) 11R22.5 Load Range H HDR2+ (CONTINENTAL), 491 rev/mile, 75 MPH,
Drive
{Hendrickson RT-403} Walking Beam, 40,000-Ib Capacity, 52" Axle Spacing,
Multileaf Springs, with Rubber Center Bushings
Cab schematic 100WL
Location 1: 9219, Winter White (Std)
Chassis schematic N/A
2 Proposal: 23135 -04
