Finance Committee

ITEM 615.06 — TRAFFIC SIGN TYPE CC

A.

SCOPE

This work shall consist of furnishing and erecting regulatory and warning traffic signs
shown on the plans or as ordered by the Engineer.

MATERIALS AND CONSTRUCTION

The Contractor shall furnish all materials, labor and equipment necessary for installing
traffic signs, and all necessary mounting hardware in accordance with relevant provisions
of Section 615 of the NHDOT Standard Specifications, latest edition.

MEASUREMENT AND PAYMENT

ITEM 615.033 - REMOVING TRAFFIC SIGN, TYPE C

A.

SCOPE

This work shall consist of removing existing regulatory, warning, and directional traffic
signs and sign supports as shown on the plans or as ordered by the Engineer.

MATERIALS AND CONSTRUCTION

The Contractor shall furnish all materials, labor and equipment necessary for removing
traffic signs, including posts, foundations, bases and all necessary mounting hardware in
accordance with relevant provisions of Section 615 of the NHDOT Standard
Specifications, latest edition.

ITEM 615.03 — TRAFFIC SIGN TYPE C

A.

SCOPE

This work shall consist of furnishing and erecting regulatory and warning traffic signs
and sign supports as shown on the plans or as ordered by the Engineer.

MATERIALS AND CONSTRUCTION

The Contractor shall furnish all materials, labor and equipment necessary for installing
traffic signs, including new posts, foundations, bases and all necessary mounting
hardware in accordance with relevant provisions of Section 615 of the NHDOT Standard
Specifications, latest edition.

ITEM 609.811 — BITUMINOUS CURBING

A. SCOPE

This work shall consist of constructing bituminous curbs as shown on the plans or as ordered by
the Engineer. Work includes all furnishing, placing, and cleanup work associated with the
installation of the curbing.

B. MATERIALS AND CONSTRUCTION

ITEM 609.5 -RESET GRANITE CURB
A. SCOPE

This work shall consist of removal, stockpiling and resetting granite curb as shown on the
drawings or as directed by the Engineer. Furnishing and placing all materials required for
resetting granite curb shall be included.

B. MATERIALS AND CONSTRUCTION

ITEM 609.01 - GRANITE CURBING
A. SCOPE

This work shall consist of constructing straight or curved granite curb as shown on the plans or
as ordered by the Engineer. Work includes furnishing, placing, and cleanup work associated
with the installation of the curb. Curb shall be installed on a properly graded, compacted bed of
crushed gravel subgrade.

B. MATERIALS AND CONSTRUCTION

ITEM 608.54 - DETECTABLE WARNING DEVICES, CAST IRON

A.

top diameter of .
50% 65% of the base diameter \, 2 85. min
\ . i
base diameter of L357
7 — “. —
0.9-1.4 (23-36 mm) ~ L
(a)
elevation
(enlarged)

SCOPE

This work shall consist of furnishing and installing a detectable warning surface, concrete
sidewalk pad and tip-down ramp, and accessories at locations shown on the plans, as
specified herein, or as ordered including any and all required surface preparation.

MATERIALS AND CONSTRUCTION

ITEM 608.34 —- 4” REINFORCED CONCRETE SIDEWALK
ITEM 608.36 — 6” REINFORCED CONCRETE SIDEWALK

A.

SCOPE

ITEM 604.47 - DROP AND PLATE CASTING
A. SCOPE

This work consists of removing existing casting, removing brick and mortar supporting the
casting, plating the hole over the structure, and backfilling the hole. Excavation, plate removal,
and final adjustment to proposed grade will be covered under Items 604.4, Item 604.45, and Item
604.46 as determined by the Engineer.

B. MATERIALS AND CONSTRUCTION

Raised structures greater than 2 inches shall be provided with asphalt fillets until the wearing
course is paved. The Engineer may direct the contractor to install fillets at critical casting
locations.

Removed castings shall not be stored on private property. They shall be stored in the City ROW
without impeding vehicular, bicycle, and pedestrian traffic. All casting shall be removed within a
timely manner.