Section 01330 - Submittals Page 2 of 4
August 2016 3066.07
1.4
1.5
1.6
1.7
1.8
C. The schedule shall account for ENGINEER’s Contract Administration and
quality control responsibilities.
PRODUCT DATA
A. CONTRACTOR shall submit copies of product data sheets as required in the
Specifications. CONTRACTOR shall clearly mark each copy of product data
sheets to identify applicable products, models, options, and other data.
MANUFACTURER'S INSTRUCTIONS
SECTION 01330
SUBMITTALS
PART 1 - GENERAL
1.1
1.2
1.3
DESCRIPTION
A.
This section specifies the general requirements and procedures for preparing
and transmitting data to ENGINEER for their information or review.
CONTRACTOR shall deliver all submittals to ENGINEER in a form acceptable to
ENGINEER.
CONTRACTOR’S DRAWINGS
A.
D.
The Drawings shall show the general arrangement and details as necessary to
provide a comprehensive description of the work to be performed.
Section 01320- Survey Control Page 2 of 2
August 2016
3066.07
PART 3 - EXECUTION
3.1
GENERAL
A.
CONTRACTOR shall obtain as-built elevation information using the site
coordinate system and datum (in the New Hampshire State Plane coordinate
system, vertical datum NAVD-88, as indicated on the Drawings).
The survey equipment used shall have a precision to the 0.01 feet.
As-built information shall include horizontal and vertical coordinate
information for the following:
SECTION 01320
SURVEY CONTROL
PART 1 - GENERAL
1.1 SURVEY REFERENCE POINTS
A.
OWNER has established survey control points around the Site for construction
horizontal and vertical control. OWNER shall provide survey control point
information to the CONTRACTOR once the contact is awarded.
Section 01310 - Project Coordination and Meetings Page 2 of 2
August 2016 3066.07
not conscientious, or not industrious, then CONTRACTOR shall replace the
supervisory representative upon written request of OWNER or ENGINEER.
D. CONTRACTOR shall only employ competent individuals on the job. Whenever
SECTION 01310
PROJECT COORDINATION AND MEETINGS
PART 1 - GENERAL
1.1
1.2
1.3
PRECONSTRUCTION CONFERENCE
A.
CONTRACTOR shall not commence Work until a preconstruction conference
with representatives of ENGINEER, and OWNER is held. This preconstruction
meeting will be arranged by OWNER and is intended to establish lines of
communication between the parties involved. The time and place of the
preconstruction meeting will be determined at least one week prior to the start
of Work.
PROGRESS MEETINGS
Section 01290 — Measurement and Payment Page 4 of 4
August 2016 3066.07
PART 2 - PRODUCTS
Not Used.
PART 3 - EXECUTION
Not Used.
[END OF SECTION 01290]
SANBORN ll HEAD
Section 01290 — Measurement and Payment Page 3 of 4
Section 01290 — Measurement and Payment Page 2 of 4
August 2016
3066.07
1.3
1.4
D.
Retainage will be with held as defined in the Bid Documents.
PARTIAL PAYMENTS:
A.
Partial payments shall be made as the work progresses. All partial invoices
and payments shall be subject to correction in the final quantity invoice and
payment.
SECTION 01290
MEASUREMENT AND PAYMENT
PART 1 - GENERAL
1.1 MEASUREMENT OF QUANTITIES
A.
B.
Measurements will not be obtained for lump sum items.
ENGINEER shall verify measurements for all unit price Contract items to
evaluate progress payment applications, and to confirm final quantities of
Work in place prior to the final payment of the Contract based upon digital
Record Drawing provided by CONTRACTOR.
