X-ing = 20.8 SF
Contractor shall record the liner feet and square feet of retroreflective pavement markings
placed. Quantities shall be recorded on a per street basis. Payment is contingent upon submittal
of quantities in a per street format.
Page 38 of 42
ITEM 632 —- RETROREFLECTIVE PAVEMENT MARKINGS
A. SCOPE
This work shall consist of furnishing and placing white or yellow retro reflective paint pavement
markings and retro reflective thermoplastic pavement markings at locations shown on the plans
or as ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
C. MEASUREMENT AND PAYMENT
ITEM 619.1 - MAINTENANCE OF TRAFFIC
A. SCOPE
ITEM 618.7 - FLAGGERS
A. SCOPE
This work shall consist of furnishing qualified flaggers, as required to direct traffic through or
around the Work as ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
The Contractor shall supply qualified flaggers as per the latest approved NHDOT Standard
Specifications for Road and Bridge Construction. Daily coverage needs to be approved by the
Engineer.
C. MEASUREMENT AND PAYMENT
ITEM 618.6 - UNIFORMED OFFICERS
A. SCOPE
This work shall consist of furnishing uniformed officers, with or without vehicles, as required to
direct traffic through or around the Work as ordered by the Engineer.
B. MATERIALS AND CONSTRUCTION
The Contractor shall supply qualified uniformed officers as per the latest approved NHDOT
Standard Specifications for Road Construction. Uniformed officers shall only be used when the
Engineer has previously approved it. Daily coverage needs to be approved by the Engineer.
ITEM 616.7 - LOCAL TRAFFIC LOOPS 6’ X 50’ (2-4-2 TURN)
A. SCOPE
This work consists of furnishing all labor, materials and equipment necessary to install the
quadruple loop detectors as directed by the Engineer.
B. MATERIALS AND CONSTRUCTION
This item shall include all labor, materials and equipment necessary to install new quadruple
loop detectors 2-4-2 turn, in conjunction with the paving program. Loops shall be installed in the
pavement surface prior to final overlay or top course.
ITEM 615.06 — TRAFFIC SIGN TYPE CC
A.
SCOPE
This work shall consist of furnishing and erecting regulatory and warning traffic signs
shown on the plans or as ordered by the Engineer.
MATERIALS AND CONSTRUCTION
The Contractor shall furnish all materials, labor and equipment necessary for installing
traffic signs, and all necessary mounting hardware in accordance with relevant provisions
of Section 615 of the NHDOT Standard Specifications, latest edition.
MEASUREMENT AND PAYMENT
ITEM 615.033 - REMOVING TRAFFIC SIGN, TYPE C
A.
SCOPE
This work shall consist of removing existing regulatory, warning, and directional traffic
signs and sign supports as shown on the plans or as ordered by the Engineer.
MATERIALS AND CONSTRUCTION
The Contractor shall furnish all materials, labor and equipment necessary for removing
traffic signs, including posts, foundations, bases and all necessary mounting hardware in
accordance with relevant provisions of Section 615 of the NHDOT Standard
Specifications, latest edition.
ITEM 615.03 — TRAFFIC SIGN TYPE C
A.
SCOPE
This work shall consist of furnishing and erecting regulatory and warning traffic signs
and sign supports as shown on the plans or as ordered by the Engineer.
MATERIALS AND CONSTRUCTION
The Contractor shall furnish all materials, labor and equipment necessary for installing
traffic signs, including new posts, foundations, bases and all necessary mounting
hardware in accordance with relevant provisions of Section 615 of the NHDOT Standard
Specifications, latest edition.
