SECTION 01320
SURVEY CONTROL
PART 1 - GENERAL
1.1 SURVEY REFERENCE POINTS
A.
OWNER has established survey control points around the Site for construction
horizontal and vertical control. OWNER shall provide survey control point
information to the CONTRACTOR once the contact is awarded.
Section 01310 - Project Coordination and Meetings Page 2 of 2
August 2016 3066.07
not conscientious, or not industrious, then CONTRACTOR shall replace the
supervisory representative upon written request of OWNER or ENGINEER.
D. CONTRACTOR shall only employ competent individuals on the job. Whenever
SECTION 01310
PROJECT COORDINATION AND MEETINGS
PART 1 - GENERAL
1.1
1.2
1.3
PRECONSTRUCTION CONFERENCE
A.
CONTRACTOR shall not commence Work until a preconstruction conference
with representatives of ENGINEER, and OWNER is held. This preconstruction
meeting will be arranged by OWNER and is intended to establish lines of
communication between the parties involved. The time and place of the
preconstruction meeting will be determined at least one week prior to the start
of Work.
PROGRESS MEETINGS
Section 01290 — Measurement and Payment Page 4 of 4
August 2016 3066.07
PART 2 - PRODUCTS
Not Used.
PART 3 - EXECUTION
Not Used.
[END OF SECTION 01290]
SANBORN ll HEAD
Section 01290 — Measurement and Payment Page 3 of 4
Section 01290 — Measurement and Payment Page 2 of 4
August 2016
3066.07
1.3
1.4
D.
Retainage will be with held as defined in the Bid Documents.
PARTIAL PAYMENTS:
A.
Partial payments shall be made as the work progresses. All partial invoices
and payments shall be subject to correction in the final quantity invoice and
payment.
SECTION 01290
MEASUREMENT AND PAYMENT
PART 1 - GENERAL
1.1 MEASUREMENT OF QUANTITIES
A.
B.
Measurements will not be obtained for lump sum items.
ENGINEER shall verify measurements for all unit price Contract items to
evaluate progress payment applications, and to confirm final quantities of
Work in place prior to the final payment of the Contract based upon digital
Record Drawing provided by CONTRACTOR.
Section 01110 - Summary of Work Page 2 of 2
August 2016
B.
3066.07
Existing GCCS features are located throughout the site. CONTRACTOR shall
locate and protect the existing GCCS features against damage. Damaged
features shall be repaired or replaced to the satisfaction of ENGINEER and
OWNER at CONTRACTOR’s expense.
Construction activities at the site must be performed during daylight hours
between 7:00 am and 4:00 pm Monday through Friday.
14 WORK PERFORMED UNDER SEPARATE CONTRACTS
A.
SECTION 01110
SUMMARY OF WORK
PART 1 - GENERAL
11 ITEMS OF WORK
A.
The major items of Work associated with the construction of the landfill gas
collection and control system (GCCS) include, but are not limited to the
following:
1. Providing construction layout and documentation survey.
2. Excavating and backfilling trenches and relocating waste associated with
excavations to the active landfill as directed by OWNER.
3. Furnishing materials for and constructing gas collection trenches.
CONTENTS
DIVISION 1 - GENERAL REQUIREMENTS
Section 01110 - Summary of Work
Section 01290 - Measurement and Payment
Section 01310 - Project Coordination and Meetings
Section 01320 - Survey Control
Section 01330 - Submittals
Section 01450 - Quality Control
Section 01520 - Construction Facilities and Temporary Controls
Section 01780 - Project Record Documents
SANBORN
HEAD
