LE@TEK
LITE-ON GROUP
GreenCobra™ Jr. LED Street Light
Luminaire Specifications
Housing
Die cast aluminum housing with universal
two-bolt slip fitter mounts to 1-1/4” to 2”
(1-5/8” to 2-3/8” O.D.) diameter mast arm.
One-piece aluminum housing provides passive
heat-sinking of the LEDs and has upper surfaces
that shed precipitation. Four-bolt mounting
bracket is available. Mounting provisions meet
3G vibration per ANS! C136.31-2001 Normal
Application, Bridge & Overpass. Mounting has
leveling adjustment from = 5° in 2.5° steps.
Electrical components are accessed without
tools via a high-strength, non-conductive
polycarbonate door with quick-release latches.
Polycarbonate material meets UL 746C for
outdoor usage. Available rubber wildlife guard
{RWG option) conforms to mast arm with no
gaps.
Light Emitting Diodes
Hi-flux/Hi-power white LEDs produce a
minimum of 90% of initial intensity at 100,000
hours of life based on IES TM-21. LEDs are
tested in accordance with IES LM-80 testing
procedures. LEDS have correlated color
temperature of 3000K (WW), 4000K (NW), or
SO00K (CW) and 70 CRI minimum. LEDs are
100% mercury and lead free.
Performance Data
Optical Systems
Micro-lens optical systems produce IESNA Type
2 or Type 3 distributions and are fully sealed
to maintain an IP66 rating. Luminaire produces
0% total lumens above 90° (BUG Rating, U=0).
Optional house side shield cuts light off at 1/2
mounting height behind luminaire. Cul-de-sac
shield provides back and side light control for
end of cul-de-sac applications, Both shields are
field installable without tools.
Electrical
Rated life of electrical components is 100,000
hours. Uses isolated power supply that is
1-10V dimmable. Power supply is wired with
quick-disconnect terminals. LED drive current
can be changed in the field to adjust light
output for local conditions (not available with
PCRS-CR or PCR7-CR options). Power supply
features a minimum power factor of .90 and
<20% Total Harmonic Distortion (THD). EMC
meets or exceeds FCC CFR Part 15. Terminal
block accommodates 2 to 14 gauge wire. Surge
protection complies with IEEE/ANS! C62.41
Category C High, 20kV/10kA.
Controls
3-Wire photocontrol receptacle is standard.
ANSI C136.41 5-wire (PCRS) or 7-wire (PCR7)
photocontrol receptacles are available. All
photecontrol receptacles have tool-less
rotatable bases. Wireless control module is
provided by others.
All data nominal, consult factory for IES files or LM-7S reports.
Product Drive System Delivered Efficacy
Current (mA) Wattage (W) Lumens (Lm} (Lm/W)
350 24 2400 | 100
GCI1 580 | 38 | 3700 97
700 | 48 4400 92
_— 700 48 : 4400 | 92
Notes:
Finish
Housing receives a durable, fade-resistant
polyester powder coat finish. Finish tested to
withstand 3000 hours in salt spray exposure
per ASTM B117. Finish tested 500 hours in UV
exposure per ASTM G154 and meets ASTM
D523 gloss retention.
Listings/Ratings/Labels
Luminaires are UL listed for use in wet locations
in the United States and Canada. DesignLights
Consortium™ qualified 120-277V product.?
International Dark Sky Association listed.
Luminaire is qualified to operate at ambient
temperatures of -40°C to 40°C, Assembled in
the U.S.A
Photometry
Luminaires photometrics are tested by certified
independent testing laboratories in accordance
with IES LM-79 testing procedures.
Warranty
10-year limited warranty is standard on
luminaire and components.
| Type2 Type 3
BUG BUG
Rating Rating
B1U0G1 B1U0G1
B1U0G1 | B1U0G1
B1U0G1 B1 U0 G1
| B1U0G1 B1U0G1
es ee
1 Nominal lumens. Normal tolerance + 10% due to factors including distribution type, LED bin variance, and ambient temperatures.
2 Not all versions DLC qualified. Consult qualified product list at www.designlights.crg for latest product listing.
© 2015 Leotek Electronics USA
GCJ_011116. Specifications subject to change without notice.
