Section 01330 - Submittals Page 2 of 4
January 2021 3066.21
1.4
1.5
1.6
1.7
1.8
C. The schedule shall account for ENGINEER’s Contract Administration and
quality control responsibilities.
PRODUCT DATA
A. CONTRACTOR shall submit copies of product data sheets as required in the
Specifications. CONTRACTOR shall clearly mark each copy of product data
sheets to identify applicable products, models, options, and other data.
MANUFACTURER'S INSTRUCTIONS
A. Where required in individual Specifications, CONTRACTOR shall submit the
manufacturer’s printed instructions for delivery, storage, assembly,
installation, adjusting, and finishing, in quantities specified for the product
data.
SAMPLES
A. Samples shall be clearly identified as to material, manufacturer, and pertinent
catalog numbers, and use for which intended, and shall be of sufficient size and
quantity to clearly illustrate functional characteristics of item, with integrally
related parts and attachment devices.
CONTRACTOR RESPONSIBILITIES
A. Review shop drawings and samples prior to distribution.
B. Determine and verify:
1. Field measurements;
2. Field construction criteria;
3. Catalog numbers and similar data; and
4. Conformance to Specifications.
C. Coordinate each submittal with the requirements of the Work and of the
Contract Documents.
D. Notify ENGINEER in writing, at time of submission, of any deviations in the
submittal from the requirements of Contract Documents. Any such deviations
permitted by ENGINEER will require modifications to the Contract Documents.
E. Begin no fabrication or Work that requires submittals until submittals have
been reviewed and accepted by ENGINEER.
SUBMISSION REQUIREMENTS
A. Submittals should be provided electronically. If a paper copy must be
submitted, then one copy may be submitted to ENGINEER promptly in
accordance with approved schedule and in such sequence as to cause no delay
in Work.
SANBORN HEAD
