ITEM 609.01 - GRANITE CURBING
A. SCOPE
This work shall consist of constructing straight or curved granite curb as shown on the plans or
as ordered by the Engineer. Work includes furnishing, placing, and cleanup work associated
with the installation of the curb. Curb shall be installed on a properly graded, compacted bed of
crushed gravel subgrade.
B. MATERIALS AND CONSTRUCTION
The Contractor shall furnish all materials, labor and equipment necessary for setting of granite
curb in accordance with relevant provisions of Section 609 of the NHDOT Standard
Specifications for Road and Bridge Construction, latest edition, and City of Nashua Standard
Specifications for Sidewalk Construction, latest edition. The most stringent specifications shall
apply unless otherwise directed by the Engineer.
Granite curb shall be set with concrete. Concrete shall extend from the top of the binder course
of pavement to below the bottom of the granite curb.
C. MEASUREMENT AND PAYMENT
Granite Curbing will be measured by the linear foot to the nearest 0.1 foot, from end to end along
the lower edge of the exposed face of the curbing and shall include all required excavation and
base course material.
Payment for Granite Curbing shall be at the contract unit price per linear foot, complete in place,
and shall include full compensation for material, labor, equipment, and all else needed to
complete the work under this item.
Page 26 of 43
