Jackson Mills HPP GENERAL CONDITIONS (PART 1)
City of Nashua Page 14 of 20
at.
22,
20.4.
20.5.
Purchaser timely notice of readiness of the Work for all required tests, inspections in the workshop of
the Supplier or its Sub-supplier. The Supplier shall arrange for tests, inspections or approvals by other
authorities and shall give the Purchaser timely notice of the date and time. The Supplier then shall have
the inspections or tests satisfactorily completed and furnish promptly to the Purchaser two (2) copies of
certificates and inspection reports relating te the Work. The Purchaser may elect to attend the
inspections or tests at their own expense.
If the Purchaser does not attend an inspection/take—over, despite being duly notified by the Supplier,
then the respective inspection/take-over will be regarded as successful and the Equipment taken over
and the Supplier shall be entitied to the respective payment. Payment does not relieve Supplier from its
obligations under Article 22,
The Purchaser may order any portion or portions of the Work to be examined to confirm that such work
is in accordance with the requirements of the Contract Documents. If such work is determined to be in
accordance with the requirements of the Contract Documents, the Purchaser will pay the cost of
examination and re-instatement and Contract Time shall be extended accordingly. If such work is
determined not to be in accordance with the requirements of the Contract Documents, the Supplier
shall correct such work and shall pay the cost of examination and correction.
Defective Work
214.
The Supplier shall promptly remove and replace at Supplier's sole cost and expense any defective Work
which has been rejected by the Purchaser and does not materially conform to the Contract Documents.
Completion and Warranty
22.1.
22.2.
22.3.
On the day that:
22.1.1.the Work, including any commissioning and testing requirements, has been compieted to the best
of the Purchaser's knowledge, information and belief after due inquiry, and has been shown to
have met the Performance Guarantees set forth in Part 1 of the Contract; and
22.1.2.the Supplier has complied fully with the Contract Documents and ail orders, rulings and directions
made pursuant thereto, or
22.1.3. latest 180 (one hundred eighty) days from the date of delivery of the last Equipment, unless the
delay is attributable to the Supplier the Purchaser shall issue a Final Certificate of Completion. The
Supplier shall acknowledge receipt of the Final Certificate of Completion by endorsing the Final
Certificate of Completion as directed by the Purchaser. If the condition specified in this Article is
fulfilled and the Purchaser fails to issue the Final Certificate of Completion within fourteen (14)
working days then this Final Certificate of Completion shall be considered as issued.
The Purchaser may issue an Interim Certificate of Completion, which will indicate those matters and
items of Work that must be completed by the Supplier (Punch List items} before a Final Certificate of
Completion may be issued.
Supplier warrants that the Equipment supplied and all other Work performed by the Supplier and Sub-
suppliers shall be new, shall meet the requirements of the Contract shall meet the requirements of all
applicable laws, codes and standards in effect where the Work is to installed, shall be free of all defects,
and shall meet the Performance Guarantees set forth in the Part 1 of the Contract.
4
Mavel Americas, Inc.
