403.1.3 | Night Item Removal
410 Bituminous Surface
Treatment
|
411 © Pneumatic Tired
» Roller
417 Rumble Strip Inlay
Division 506
520 Portland Cement
' Concrete
! change after two sub-lots (06/06/17)
21.4, 2.1.2, 3.2, 3.3, 3.4 - Identifies
© conformance (06/06/17)
Section 403
3.4.11 - 3.4.15 - Describes the
Introduction of Recycled Materials at a
Batch Plant and Controls Minimum Dry
Time for Recycled Aggregates (07/06/18)
3.5.2 & 3.5.2.1 - Revises Recycled :
Materials Requirements (07/06/18) i
3.10.10.1 - Removes penalty for failing
tack (06/06/17)
3.12 - Allows a reduction in use of
pneumiatic-tired rollers (06/06/17)
3.17.1.3 - Revises the NETTCP QA
Technologist requirements (11/07/18)
3.17.3.1.1 - Revises HMA gradation
specification Emits, completes addition of
winter binder, removes allowance for Aim
4.1.1 - Removes reference to Night Items
(06/06/17)
Removes aij references to Night Items in 06/06/17
2,1 - Adopts new AASHTO Specifications 06/06/17 | 07/06/18 -
for Emuisions (04/13/16) .
3.4.1.1 - Revises pavement conditions,
application rate for tack (01/04/17}
tack sampling and penalties for non-
3.2 & 3.5.2 - Amends Distribution
Equipment and Initiates an Annual Tack
Truck Inspection Program (07/06/18)
3.5.5 - Requires the use of pneumatic 04/02/18 : 07/06/18
tired rollers on all Section 411 paving :
(06/06/17)
5.1.1 - Ensures Tack Used for PMST and
Leveling Course is a Pay Item (07/06/18)
Removes Pay Items (04/02/18)
; 2.1 & 3.7 - Specifies PMST as the asphalt | 04/02/18 :
inlay to fill in rumble strips
3.1.6,2.1.2 A - Revise NETTCP QA | 04/02/18 11/07/18 ©
Technologist requirements (11/07/18) i
3.8.1.1 - Revises the acceptable concrete
delivery temp to 90 degrees Fahrenheit
(04/02/18)
Page 2 of 3
