6 Wheel Dump Conventional Body ,
intent: it is the intent of these specifications to upfit two 6 wheel chassis for use as a dump truck equipped
with a nose and wing plow, stainless steel spreader equipped with a pre-wet system and all necessary hitches,
vaives, hydraulic cylinders and controls. The following are the minimum acceptable specifications. Any
exceptions must be clearly noted in the column titled "Manufacturers specs”.
Manufactures Specifications
A.1) Conventional 9.5 cubic yard, 10’ body shall be offered | 10'-36"-42" #304 SS Body, 1/4" Floor and
for Streets. ce | Tailgate with 3/16" Sides and Front.
2) Conventional 5-7 cubic yard, 10’ body shall be offered | _ 10'-27"-27" #304 SS Body, 1/4” Floor and
to Parks. Tailgate with 3/16" Sides and Front.
B.1}. Body 1 shall be painted Omaha Orange same code as :
the host cab for Streets No Paint, #304 SS Body
2) Body 2 shall be painted Black for the Parks vehicle. - No Paint, #304 SS Body
C. Headboard shall: be minimum of 39” high constructed of [<8 eo oe TE
10 gauge steel with a % cab shield, equipped with an
electric cab controiled load tarp.
D. Body floor will be constructed of %’ AR steel. - 1/4" #304 Stainless Steel
E. Cross members shall be 4" [beams. Longsills 6° tbeam. :_ No Crossmembers, 8" 1 Beam Longsills
| F. Body shall have a dirt shedding boxed top rail with - 3/16" #304 Stainless Steel
vertical side -bracing. Straight vertical sides will be of 7 /
gauge steel and a dirt shedding lower rub rail.
G. Tailgate plate shall be constructed with %” AR steel. It The Parks body will only have THREE, (3)
shall have perimeter box bracing with 6 panel bracing made | panels due to the reduced height. It will
from 10 gauge material. There shall be two 3/8” grade 30 | have the Three, (3) coal doors.
galvanized spreader chains. 3 asphalt doors will be
standard,
H. 1} Body 1 sides shall be 36” minimum, tailgate 42”
minimum for Streets.
2} Body 2 sides and tailgate shall be 27” maximum for
Parks,
IFB1005-992729 6 Wheel Bump Truck Up-Fits Page | 3
