INTERNATIONAL?
Prepared For:
CITY OF NASHUA
John Stewart
PO Box 2019
Nashua, NH 03061-2019
(603)584 - 3565
September 08, 2020
Presented By:
LIBERTY INT'L TRKS OF NH
James C Ramsay
1400 S. WILLOW STREET
MANCHESTER NH 03103 -
(603)623-8873
AXLE CONFIG:
MISSION:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION,
AUTOMATIC:
AXLE, FRONT DRIVING:
AXLE, REAR, SINGLE:
CAB:
TIRE, FRONT:
TIRE, REAR:
Model Profile
2020 CV515 SFA (CV515)
4x4
Requested GVWR: 21000. Calc. GVWR: 22500
Wheelbase: 165.00, CA: 83.80, Axle to Frame: 63.00
{International 6.6} EPA 2017, 350HP @ 2700 RPM, 700 Ib-ft Torque @ 1600
RPM, 2900 RPM Governed Speed, 350 Peak HP (Max)
{Allison 2750 RDS} 5th Generation Controls, Close Ratio, 6-Speed with Double
Overdrive, with PTO Provision, Less Retarder, Includes Park Pawl, with 23,500-
lb GVW and 37,500-lb GCW Max, On/Off Highway
{Dana Spicer 60-256} Single Reduction, 7,500-lb Capacity, with Hub Piloted
Wheel Mounting
{Dana Spicer S16-130} Single Reduction, 15,500-lb Capacity, 190 Wheel Ends
Gear Ratio: 4.30
Conventional, Day Cab
(2) 225/70R19.5 Load Range G HYBRID HS3 (CONTINENTAL), 649 rev/mile,
87 MPH, All-Position
(4) 225/70R19.5 Load Range G HYBRID HD3 (CONTINENTAL), 647 rev/mile,
87 MPH, Drive
SUSPENSION, REAR, SINGLE:15,500-Ib Capacity, Vari-Rate Springs
PAINT:
Cab schematic 100CX
Location 1: 9219, Winter White (Std)
Chassis schematic N/A
2 Proposal: 22625-01
