American Society for Testing and Materials (ASTM):
ASTM D1557 _ Test for Moisture-Density Relations of Soils and Soil-Aggregate Mixtures
Using 10 Pound Rammer and 18-Inch Drop
State of New Hampshire Department of Transportation (NHDOT) Standard Specifications for
Road and Bridge Construction, latest edition:
Section 304 Gravel Base Course
Section 306 Reclaimed Stabilized Base
Section 401 Plant Mix Pavements - Table 401-1 and 401-2
Section 609 Curbs
Prime and Tack Coats - shall conform to the NHDOT Standards
Federal Specifications:
SS-S-164 Sealing Compound, Hot Poured Type, for Joints in Concrete
SS-S-1401C Sealants, Joint, Non-Jet-Fuel-Resistant, Hot Applied, for Portland
Cement and Asphalt Concrete Pavement
1.05 = SUBMITTALS: INACCORDANCE WITH REQUIREMENTS OF GENERAL
SPECIFICATIONS, SUBMIT THE FOLLOWING:
A. _ Six sets of complete job mix formula shall be submitted to the Engineer at least two weeks
before any of the work of this section is to begin.
B. Delivery slips shall be furnished with each load of mix delivered to the project.
Information shall include:
Vehicle identification.
Date.
Project.
Identification of material.
Gross, tare and net weights.
Signed by the bituminous concrete producer.
Stamped by a licensed public weighmaster.
Crushed Gravel and Curbing submittals as required by the NHDOT
specifications.
ANAM YWND
2019 Sewer Replacement Project Road Restoration
Nashua, NH 02745-2
