10.
11.
12.
13.
14.
ASTM C882 Standard Test Method for Bond Strength of Epoxy-Resin
Systems Used With Concrete By Slant Shear
ASTM C1244 Standard Test Method for Concrete Sewer Manholes by the
Negative Air Pressure (Vacuum) Test Prior to Backfill
ASTM D412 Standard Test Methods for Vulcanized Rubber and
Thermoplastic Elastomers — Tension
ASTM D624 Standard Test Method for Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers
ASTM D638 Standard Test Method for Tensile Properties of Plastics
ASTM D695 Standard Test Method for Compressive Properties of Rigid
Plastics
ASTM D790 Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
ASTM D2240 Standard Test Method for Rubber Property — Durometer
Hardness
ASTM D4787 Standard Practice for Continuity Verification of Liquid or
Sheet Linings Applied to Concrete Substrates
ASTM D7234 Standard Test Method for Pull-Off Adhesion Strength of
Coatings on Concrete Using Portable Pull-Off Adhesion
Testers
1.04 SUBMITTALS:
A. Shop Drawings: The Contractor shall submit the following for the manhole rehabilitation
products in accordance with the requirements set forth in pertinent sections:
1.
Physical and chemical properties
2. Material composition
3. Confirmation of conformance to applicable reference standards
4. MSDSs
5. Warranty information
2019 CIPP Lining Project Manhole Rehabilitation
Nashua, NH 02800-2
