SECTION 08100
METAL DOORS AND FRAMES
PART 1 - GENERAL
1.1 SUMMARY
A. Provide metal doors with frames, where shown on the Drawings, as specified
herein, and as needed for a complete and proper installation.
1.2 SUBMITTALS
A. Submit the following:
1. Materials list of items proposed to be provided under this Section.
2. Manufacturers’ specifications and other data needed to demonstrate
compliance with the specified requirements.
3. Shop drawings showing details of each frame type, elevations of door
designs, details of openings, and details of construction, installation, and
anchorage.
4. Manufacturer’s recommended installation procedures
1.3 QUALITY ASSURANCE
A. Use skilled workers who are experienced and are completely familiar with the
specified requirements and the methods needed for proper performance of the
work of this Section.
B. Unless specifically otherwise approved by ENGINEER, provide all products of
this Section from a single manufacturer.
C. Fire Rated Doors and Frames: (required ratings as indicted on the drawings)
shall be constructed and tested in accordance with UL-10B and approved by
Underwriter’s Laboratories or other recognized testing agency having a factory
inspection service.
PART 2 - PRODUCTS
2.1 METAL DOORS
A. Acceptable manufacturers
1. Steelcraft of Cincinnati, Ohio
2. Pioneer Industries of Carlstadt, New Jersey
3. Security Metal Products of Ontario, California
4. Other manufacturers with ENGINEER’s approval
File No. 3066.09 Metal Doors and Frames 08100- 1 of 4 December 2017
