SECTION 02100
GRUBBING AND TOPSOIL REMOVAL
PART 1 - GENERAL
1.1. SCOPE OF WORK
A.
This Work shall consist of grubbing, removing, and disposing of all vegetation
and debris including stumps, branches, and shrubs, within the limits of Work
shown on the Drawings or specified below.
PART 2 - PRODUCTS
Not used.
PART 3 - EXECUTION
3.1 CONSTRUCTION REQUIREMENTS
A.
B.
No trees shall be cut outside of the work area designated on the Drawings.
CONTRACTOR shall install erosion and sediment controls in areas
topographically below areas, that will be disturbed and shall perform the Work
in a manner that limits erosion and sedimentation. CONTRACTOR shall cease
work and install additional erosion and sediment control measures if directed
by OWNER, ENGINEER, or the CQA Consultant.
Grubbing shall include the removal of brush, stumps, and large roots to a depth
of 2 feet below subgrade unless otherwise directed by ENGINEER or OWNER.
In order to conserve topsoil, CONTRACTOR shall make use of rake teeth on
bulldozers in the process of removing stumps and brush unless other
equipment is allowed by OWNER.
Stumps, large roots, branches, other wood, brush, weeds, grass and other
perishable material resulting from the clearing and grubbing operations shall
be disposed of in an on-site area designated by OWNER.
CONTRACTOR shall strip topsoil for subsequent reuse. Topsoil shall be
stockpiled on-site in an area approved by OWNER.
[END OF SECTION 02100]
P:\3000s\3066.09\Source Files\Type I! App\Specifications\ Division 2 Specifications\02100 Grubbing and Topsoil Removal.docx
File No. 3066.09 Grubbing and Topsoil Removal 02100 - 1 of 1 December 2017
