34
PREPARA TION
Verify glacing openings are cerreet size and within tolerance.
Verily gazing channels, recesses, and weeps are clean and free of obstructions.
GLAZING
tnstall glass in accordance with manufacturer's istructions, exept where local codes or GANA Glazing Manual
indicate more stringent requirements.
MiPLD QUALITY CONTROL
Coated glass. when viewed from minimum of 10 fect. exhibiting slightly different hue or color not apparent im
hand samples, will not be cause of rejection of glass units, as determined by Architect.
Verify glass ts free of chips, cracks, and other inclusions that could inhibit structural or austhetic integrity,
CLEANING
Clean ulnss promptly after installation in accardance with manefacturer's mstnictions.
Remove labels fram vlass surface.
Do net use harsh cleaning materials or methods that would damage ylass.
PROTECTION
Protect installed glass from damage during constriction.
Protect instailed ylass fram contact with contaminating substances resulling from construction operations
Remove and rephice glass that is broken, chipped, cracked, abraded, or damaged in other ways during
construction period. including uatural causes. aecidents, and vandalisat.
END OF SECTION
{(FB1O75-0910319 ADDENDUM 2 Pape 6 of 6
