HUBER Technology, Inc. - Huntersville, NC
Quotaiicn No: 71006086
Date: Jul 17, 2019
Page: 6 (8)
Warranty and Returns Policy & instructions
Huber Technology, Inc. (“Huber”) warranties any original Huber part (mechanical or electrical) for a period of:
A. Twelve (12) months from the date of purchase and only when part(s) are installed by a Huber factory trained
technician. Should the part(s) fail within the warranty period, a replacement shall be supplied at no cost to the owner
(“Replacement Part”)
1. Only valid if the product is operated in accordance with the manufacturer's instructions.
2. The replacement part(s) must not be modified or changed in anyway.
3. The replacement part(s) must be installed by a qualified person to the manufacturer’s specifications
Or
B. Three (3) months from the date of purchase and/or installed by a non-Huber factory trained technician.
1. Only valid if the product is operated in accordance with the manufacturer's instructions
2. The replacement part(s) must not be modified or changed in anyway.
3. The replacement part(s) must be installed by a qualified person to the manufacturer’s specifications
This warranty does not apply to any damage or defect arising out of any of the following circumstances:
* Part(s) needing repair or replacement due to events or circumstances outside of normal use and operation
of the equipment.
* Part(s) or components damaged due to power surges, short circuits, loss of power, lightning strikes,
fire or water damage, vandalism, theft, or any other causes outside of normal use and operation of
the equipment or that would normally be covered by casualty insurance on the equipment.
° Damage or defects caused by neglect, incorrect application, abuse, or by accidental damage of the
parts or components.
* Repair or replacement of part(s) or components due to improper or negligent operation of the equipment.
* Damage or defects to the part(s), component(s), or equipment caused by the attempted repair by an
unauthorized or unqualified person.
All Huber parts warranties are non- transferable, and cannot be sold, assigned or transferred in any other way.
This warranty of original Huber Service parts does not include the labor to remove the defective part nor the
labor to install the new part. All labor costs associated with the replacement of the part is the responsibility of
the owner. The request for assistance of a certified Huber technician is available upon the issuance
of a purchase order by the owner. The fee for the assistance of a Huber technician includes labor
(billed at prevailing Huber Field Service Base Rates) plus associated expenses for travel to and from the jobsite.
Return of New Wear or Spare Parts:
+ Any original Huber part(s) returned to Huber after a purchase order has been submitted is subject
to a flat twenty percent (20%) restocking fee for each part returned.
¢ The customer has up to thirty (30) days to return a part from the purchase order submittal date to Huber.
Returns will not be accepted past thirty (30) days.
¢ Part(s) must be new and never installed. Any indication of wear or installation, at Huber’s sole discretion,
may result in the part(s) being shipped back to owner, at the owner’s cost, and no credit shall be issued.
° Exception:
The owner may exchange, without a restocking fee, if the incorrect part(s) is delivered and/or sold to the
HUBER Technology, Inc.
Huber Technology, Inc. - 9735 NorthCross Center Court Suite A = Huntersville, NC 28078
Phone (704) 949-1010 + Fax (704) 949-1020 + huber@hhusa.net + www.huber-technology.com
A member of the HUBER Group
