INTERNATIGNALD
Prepared For:
CITY OF NASHUA
John Stewart
PO Box 2019
Nashua, NH 03061-2019
(603)584 - 3565
Presented By:
LIBERTY INT'L TRKS OF NH
James C Ramsay
1400 S. WILLOW STREET
MANCHESTER NH 03103 -
(603)623-8873
AXLE CONFIG:
MISSIGN:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION,
AUTOMATIC:
CLUTCH:
AXLE, FRONT NON-DRIVING:
AXLE, REAR, SINGLE:
CAB:
TIRE, FRON7:
TIRE, REAR:
fiodel Profile
2026 HY507 SFA (AY507)
4X2
Requested GVWR: 39000. Calc. GVWR: 36220
Wheelbase: 165.00, CA: 90.00, Axle to Frame: 63.00
{Cummins L9 300} EPA 2017, 300HP @ 2000 RPM, 860 ib-ft Torque @ 1300
RPM, 2200 RPivi Governed Speed, 300 Peak HP (Max)
{Allison 3500 RDS} 5th Generation Controls, Wide Ratio, 5-Speed with
Overdrive, with PTO Provision, Less Retarder, Includes Oi! Level Sensor, with
80,000-Ib GVW and GCW Max, On/Off Highway
Omit Item (Clutch & Control)
{Dana Spicer |-?60W} Wide Track, |-Beam Type, 16,000-lb Capacity
{Dana Spicer $23-190} Single Reduciion, Hypoid Gearing, 23,000-Ib Capacity,
R Wheel Ends Gear Ratio: 5.57
Conventional, Day Cab
(2) 11R22.5 Load Range H HSC1 (CONTINENTAL), 496 rev/mile, 75 MPH, All-
Position
(4) 11R22.5 Load Range H HDR2 (CONTINENTAL), 491 rev/mile, 75 MPH,
Drive
SUSPENSION, REAR, SINGLE:31,000-lb Capacity, Vari-Rate Springs, with 4500-Ib Capacity Auxiliary Multileaf
PAINT:
Springs
Cab schematic 100WK
Location 1: 5047, Green (Prem)
Chassis schematic N/A
2 Proposal: 21234-0141
