6 Wheel Dump Conventionai Body
Intent: it is the intent of these specifications to upfit two & wheel chassis for use as a dump truck equipped
with a nose and wing plow, stainless steel spreader equipped with a pre-wet system and ail necessary hitches,
valves, hydraulic cylinders and controls. The following sre the minimum acceptable specifications. Any
exceptions must be clearly noted in the column titled "Manufacturers specs”.
, Manufactures Specifications
A2) Conventional 9.5 cubic yard, 10’ body shall be offered
for Streets.
10'-36"-42" #304 SS Body, 1/4” Floor and
Tailgate with 3/16" Sides and Front.
2) Conventional 5-7 cubic yard, 10’ body shall be offered
to Parks.
- 10'-27"-27" #304 SS Body, 1/4” Floor and
Tailgate with 3/16" Sides and Front.
B.1). Body 1 shail be painted Omaha Orange same code as
the host cab for Streets
No Paint, #304 SS Body
2) Body 2 shall be painted Black for the Parks vehicle.
- No Paint, #304 SS Body
C. Headboard shall be minimum of 39” high constructed of
10 gauge steel with a % cab shield, equipped with an
electric cab controlled load tarp.
DB. Body floor will be constructed of %’ AR steel,
- 1/4" #304 Stainless Steel
E. Cross members shall be 4” | beams. Long sills 6” { beam.
- No Crossmembers, 8" | Beam Longsilis
F. Body shall have a dirt shedding boxed top rail with
vertical side bracing. Straight vertical sides will be of 7
gauge steel and a dirt shedding lower rub rail.
- 3/16" #804 Stainless Steel
G. Tailgate plate shalt be constructed with %” AR steel. It
shall have perimeter box bracing with 6 panel bracing made
from 10 gauge material. There shall be two 3/8” grade 30
galvanized spreader chains. 3 asphalt doors will be
standard.
The Parks body will only have THREE, (3)
panels due io the reduced height. It will
have the Three, (3) coal doors.
H. 1} Body 1 sides shall be 36” minimum, tailgate 42”
minimum for Streets.
2) Body 2 sides and tailgate shall be 27” maximum for
Parks.
1FB100S-092719 6 Wheel Dump Truck Up-Fits
Page [ 3
