e Furnish and install a “loaner” gateway to connect all the existing DH+ equipment
to the new ethernet network. This will allow us to change out one panel at a time,
thereby minimizing process disruptions.
Deploy and test all SCADA PCs
Testing of all on site PLC panels as shown on contract drawings
Test all plant PLC panels — !/O checkout and startup
Onsite SCADA modifications
Testing of auxiliary panels
Setup network bridge
Coordinate cutovers
System verification loop tests and PID tuning
Operator training 3 days +/-
® eee eoe e@# @ @ ®8
Total lump sum cost including labor, travel and misc. materials $114,000.00
We have included in the above pricing, one year’s software and programming support of
the existing system. Any new programming for additional functionality or new equipment
would be billed at our standard programmer rate of $120.00/mh. We also can provide
additional maintenance services on a contract or as needed basis. For example the
Manchester plant prefers as needed and the yearly billing is typically less than
$9,000.00, labor and materials, depending on the level of support required.
We appreciate the opportunity to quote and if you have any questions please contact
us.
Sincerely,
OC. Bae GI. CES,
Charles L. Fritz, P.E. Chuck fritz
Vice President Vice President
Page 2 El] Proposal 1781-P
