() TASER
17800 N. 85th St, Scottsdale, Arizona 85255 * 480-991-0797 * Fax 480-991-0791 * www.TASER.com
January 4, 2016
To: United States state, local and municipal law enforcement agencies
Re: Sole Source Letter for TASER International, inc.’s Conducted Electrical Weapons
A sole source justification exists because the following goods and services required to satisfy the agency's needs
are only manufactured and available for purchase from TASER international. TASER is also the sole distributor
of all TASER brand products in the States of AR, CT, DE, FL, GA, Hi, JA IL, IN, KS, LA, MA, MD, ME, MI, MN,
MoO, MS, NC, ND, NE, NH, NJ, NY, OK, OR, PA, RI, SC, SD, TX, VA, VI, VT, WI, WV, and the District of
Columbia.
TASER CEW Descriptions
Ew
Multiple-shot CEW
High efficiency flashlight
Static dual LASERs (used for target acquisition)
ARC switch enables drive-stun with or without a Smart Cartridge installed
Central information Display (CID): Displays mission-critical data such as remaining battery energy,
burst time, operating mode, and user menu io change settings and view data on a yellow-on-black
display
* The Trilogy flog system records information from a variety of sensors into three data logs: Event fog.
Pulse log, and Engineering log. Data can be downloaded using a universal serial bus (USB) data
interlace module connected to a personal computer (PC), Data may be transferred to Evidence.com
services.
Real-time clock with back-up battery
Onboard self-diagnostic and system status monitoring and reporting
Ambidextrous safety switch
Capable of audio/video recording with optional TASER CAM HD recorder
The trigger activates a single cycle (approximately 5 seconds). Holding the trigger down will continue
the discharge beyond the standard cycle (except when used with an APPM or TASER CAM HD AS).
The CEW cycle can be stopped by placing the safety switch in the dawn (SAFE} position,
Compatible with TASER Smart Cartridges only
X26P cEW
® High efficiency flashlight
« Red LASER (used for target acquisition)
e« Central Information Display (CID): Displays data such as calculated remaining energy, burst time,
and notifications
« The Trilogy log system records information from a variety of sensors into three data jogs: Event jog,
Pulse log, and Engineering log. Data can be downloaded using a universal serial bus (USB) data
interface module connected to a personal computer (PC). Data may be transferred to Evidence.com
services.
Reai-time clock with back-up battery
Onboard self-diagnostic and system status monitoring and reporting
Ambidextrous safety switch
Capable of audio/video recording with optional TASER CAM HD recorder
The trigger activates a single cycle {approximately five seconds). Holding the trigger down will
continue the discharge beyond the standard cycle (except when used with an APPM or TASER CAM
HD AS). The CEW cycle can be stopped by placing the safety switch in the down (SAFE) position.
Compatible with TASER standard series cartridges
Anon Signal Performance Power Magazine (SPPM)
* Battery pack for the X2 and X26P conducted electrical weapons
* Shifting the safety switch from the down (SAFE) to the up (ARMED) positions sends a signal from the
SPPM. Upon processing the signal, an Axon system equipped with Axon Signal technology
transitions from the BUFFERING to EVENT mode.
X2
see @ ow O
oeee8e
ae 8 8 @
