INTERNATIONAL
Prepared For:
CITY OF NASHUA
John Stewart
PO Box 2019
Nashua, NH 03061-2019
(603)584 - 3565
June 20, 2018
Presented By:
LIBERTY INT'L TRKS OF NH
James C Ramsay
1400 S. WILLOW STREET
MANCHESTER NH 03108 -
(603)623-8873
AXLE CONFIG:
MISSION:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION,
AUTOMATIC:
CLUTCH:
AXLE, FRONT NON-DRIVING:
AXLE, REAR, SINGLE:
CAB:
TIRE, FRONT:
TIRE, REAR:
SUSPENSION, RR, SPRING,
SINGLE:
PAINT:
Modei Profile
2019 HV507 SFA (HV507)
4X2
Requested GVWR: 39000. Caic. GVWR: 34220
Wheelbase: 195.00, CA: 120.00, Axle to Frame: 63.00
{Cummins L9 300} EPA 2017, 300HP @ 2000 RPM, 860 Ib-ft Torque @ 1300
RPM, 2200 RPM Governed Speed, 300 Peak HP (Max)
{Allison 3500 RDS} 5th Generation Controls, Wide Ratio, 5-Speed with
Overdrive, with PTO Provision, Less Retarder, Includes Oil Level Sensor, with
80,000-Ib GVW and GCW Max, On/Off Highway
Omit item (Clutch & Control)
{Dana Spicer E-1462W} Wide Track, |-Beam Type, 14,000-ib Capacity
{Meritor RS-21-160} Single Reduction, 21,000-b Capacity, 200 Wheel Ends
Gear Ratio: 5.38
Conveniional
(2) 11R22.5 Load Range H HSC1 (CONTINENTAL), 496 revimile, 75 MPH, All-
Position
(4) 11R22.5 Load Range H HDR2 (CONTINENTAL), 491 rev/mile, 75 MPH,
Drive
Vari-Rate; 23,500-ib Capacity, with 4500 lb Auxiliary Rubber Spring
Cab schematic 208WK
Location 1: 0311, Omaha Orange (Sid)
Location 2: 0001, Canyon Black (Std)
Chassis schematic N/A
2 Proposal: 19990 -02
