Form 3221-7, 12-47
: A : ies Supersedes Form 3221-T, 04-14
Engineering Company
rranty Information
Hunter Engineering Company warrants new equipment to be free from defects in material and workmanship
under normal conditions of use for a period of one (4) year* from the date of installation. Exceptions to
this warranty are listed below.
* All circuit boards are warranted for a period of three (3) years.
* PC components and options installed inside the PC are warranted for a period of three (3) years.
« LCD's are warranted for a period of three (3) years.
> Power supplies are warranted for a period of three (3 years.
» Transducers** are warranted for a period of three (3) years.
* Wheel Balancer rnotors are warranted for a period of three (3) years.
* Wheel Balancer shafts are warranted for a period of three (3) years.
* Tire Changers are fully warranted for a period of three (3) years with the exception of consumable
paris and TCR1 power units.
s All lift and Hunter TCR? power units are warrantied for a peried of two (2) years.
* Normal wear items are not covered with the exception of batteries, which are covered for a period of
six (6) monihs.
* Repiacement paris purchased through the Hunter Service Center and no longer covered by
machine warranty are warranted for a period of six (6) months.
Field labor is covered under this warranty for a period of six months.
This warranty does not include normal weer items and does not apply to any product which hes been subject
to abuse, misuse, alterations, accident, exposure to the elements, tampering, unreasonable use, or failure to
provide reasonable and necessary maintenance.
In case of any warranty claim it will be necessary to contact your local authorized Hunter Service
Representative. To have an item considered for warranty it must be returned to Hunter Engineering
Campany for inspection and evaluation. This must be done on a freight prepaid basis. If after our inspection
the product proves to be defective, and is within the time frame specified, we will repair or replace the item
at no additional cost.
This is Hunter Engineering Cormpany’s only warranty with respect to new equipment. Hunter Engineering
Company disclaims all other warranties to the extent permitied by law. This express warranty and any
implied warranties of merchantability and fitness for a particular purpose shall not extend beyond the
warranty period. Hunter Engineering is not responsible for any incidental or consequential damages,
including, but not limited to, loss of business.
We do not authorize any person fo assume for us any other liabilities with our products. Any remaining
warranty may be transferred to subsequent purchasers by forwarding the purchaser's name, address,
phone number and equiprnent serial number to:
Hunter Engineering Company
Customer service Department
11250 Hunter Orive
Bridgeton, MO 63044
(800) 448-6848
*
During the first 30 days complete PC's will be replaced af no charge under warranty with Repair Lab
approval. Affer 30 days they will be repaired at no charge under warranty. All internal PC components will be
replaced at na charge for a period of 3 years from the date of installation.
* Transducers include camber cells, brake tester load and weight cells, suspension analyzer pickups, half
effect sensors and balancer force transducers.
