1.05
10.
11.
12.
13.
14.
ASTM D624 Standard Test Method for Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers
ASTM D638 Standard Test Method for Tensile Properties of Plastics
ASTM D695 Standard Test Method for Compressive Properties of Rigid
Plastics
ASTM D790 Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
ASTM D2240 Standard Test Method for Rubber Property — Durometer
Hardness
ASTM D4787 Standard Practice for Continuity Verification of Liquid or
Sheet Linings Applied to Concrete Substrates
ASTM D7234 Standard Test Method for Pull-Off Adhesion Strength of
Coatings on Concrete Using Portable Pull-Off Adhesion
Testers
SUBMITTALS:
Shop Drawings: The Contractor shall submit the following for the manhole rehabilitation
products in accordance with the requirements set forth in pertinent sections:
1.
2.
oOo oa FF WwW
Physical and chemical properties
Material composition
Confirmation of conformance to applicable reference standards
MSDSs
Warranty information
Instructions for installation and repair
Manufacturer’ s statement of compatibility between epoxy or polyurethane coating
and cementitious base coat
QUALIFICATIONS:
The qualifications of the aoparent low bidder shall be submitted no later than seven (7)
calenda’ days after the bid opening to the Engineer for evaluation prior to meking a
recommendation for award. These qualifications snall include detailed descriptions of the
following:
1.
Name, business address, and teleohone number of the Contractor
02800-2
