SECTION 02800
MANHOLE REHABILITATION
PART 1 - GENERAL
1.01
A.
1.02
1.03
SCOPE OF WORK:
Provide all labor, materials, accessories, equipment, tools, and incidentals required to
renabilitate and test manholes as shown on the Drawings and as specified herein,
including surface preparation, flow diversion, inflow control, invert and channel
reconstruction, internal lining, chimney seals, and pipe connections.
The manhole rehabilitation products shall be fabricated from materials which, when
installed, shall mitigate or terminate infiltration and snall be chenically-resistant to
withstand exposure to domestic sewage.
RELATED WORK SPECIFIED ELSEWHERE:
Section 01300 — Submittals
Section 02760 — Structural Grouting
REFERENCE SPECIFICATIONS, CODES, AND STANDARDS:
Without limiting the generality of the other requirenents of the Specifications, all
work herein shall conform to the applicable requirenents of the following
documents. All referenced specifications, codes, and standards refer to the most
current issue available at the time of Bid.
1. ASTM C109 Standard Test Method for Compressive Strength of
Hydraulic Cenent Mortars (Using 2-in. or [50-mm] Cube
Specimens)
2. ASTM C273 Standard Test Method for Shear Properties of Sandwich
Core Materials
3. ASTM C293 Standard Test Method for Flexural Strength of Concrete
(Using Simple Beam With Center-Point Loading)
4. ASTM C496 Standard Test Method for Splitting Tensile Strength of
Cylindrical Concrete Specimens
5. ASTM C882 Standard Test Method for Bond Strength of Epoxy-Resin
Systems Used With Concrete By Slant Shear
6. ASTM C1244 Standard Test Method for Concrete Sewer Manholes by the
Negative Air Pressure (Vacuum) Test Prior to Backfill
7. ASTM D412 Standad Test Methods for Vulcaized Rubber and
Thermoplastic Elastomers — Tension
02800-1
