SECTION 02769
PNEUMATIC ASSISTED AND SEGMENTAL STATIC HDPE SLIPLINING
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and
Supplementary Conditions, apply to this section.
1.2 SUMMARY
A. This Section includes the following:
1. Furnishing all plant, labor, equipment and materials, cleaning,
internal inspection, point repairs, and performing all operations in
connection with the furnishing and the insertion of high density
polyethylene pipe (HDPE) inside the existing host pipe using
pneumatically assisted sliplining. Work shall include cleaning and
videotaping the existing sewer lines, as specified in pertinent
sections of the Contract specifications, flow handling and/or bypass
pumping of existing flows (if required), maintaining surface water
drainage services, and any restoration work needed to replace
damaged structures and landscaping or ground conditions.
2. It shall be the responsibility of the Contractor to perform the work
under this contract in a sequence which is the least disruptive to the
normal flow of vehicular and pedestrian traffic, and in a manner
which will protect the public from damage to person and property
within the limits of and for the duration of the contract.
3. Host Pipe is defined as the existing sanitary, storm drain and/or
combined sewer to be replaced by sliplining.
4. Renewal Pipe is defined as new High Density Polyethylene pipe
(HDPE) to be installed inside the host pipe.
1.3 SUBMITTALS
A. General: Submit each item in this Section according to the Conditions of
the Contract.
02769-1
