The work shall be paid for at the contract unit price per Ton for Item 6e.
SAWED BITUMINOUS PAVEMENT
Sawing bituminous pavement shall be measured per linear foot and shall conform
to Section 628 of the NHDOT Standard Specifications.
Saw-cutting for driveways and intersecting streets shall be measured for payment.
Saw-cutting of the final trench shall be measured for payment.
The work shall be paid for at the contract unit price per linear foot for Item 6g.
COLD PLANNING OF BITUMINOUS SURFACES:
Cold planning shall be measured per square yard as determined by the actual
surface measurements of the lengths and widths as shown on the plans or as
ordered by the Engineer and shall conform to Section 417 of the NHDOT
Standard Specifications.
The work shall be paid for at the contract unit price per square yard
for Item 6h.
G. REMOVE AND RESET CURBING
1.
The unit price paid shall be measured for payment per linear foot of curbing
removed and reset. Only curbing approved and ordered by the Engineer to be
reset will be measured for payment. Curbing damaged by the contractor will be
reset or replaced with new curb at no cost to the city.
The unit prices under the appropriate subdivisions of this item shall constitute full
compensation for removing and resetting curbing, complete in place, as necessary
for removal and replacement, and all work incidental thereto and not specifically
included for payment under other items.
Granite curbing where it exists at proposed handicap ramp locations as shown on
the plans shall be removed and reset according to this specification.
The work shall be paid for at the contract unit price per Linear Foot for Item 6i
Reset Curbing.
INSTALL VERTICAL GRANITE AND ASPHALT CURBING
The unit price shall be measured per linear foot for vertical granite curbing
installed at locations as directed by the Engineer.
01150 - 16
