4. Bypass pumping and plugging or blocking of sewer flow shall be considered
incidental to the work and shall not be measured separately for payment.
5. Work shall conform to the City of Nashua Standard Specifications Sewers &
Drains (Appendix A).
6. The work under this section shall be paid at the contract unit price per vertical foot
under Item 1f, Replace sewer MH with 4 foot diameter Sewer Manhole, Item
1f(1), Replace or Construct 4 foot diameter Doghouse Sewer Manhole.
E. SLIP LINING:
Slip lining work will be done as required by Section 02769 and will be paid by
Items 1k (1) (SEE BELOW) and 1k (2).
NOTE ON INSURANCE REQUIRED BY THE RAILROAD AGENCY:
Item 1k (1), in addition to the work necessary to provide the slip lining
product installed, will also include all costs associated with Railroad
Insurance requirements. These are as follows:
1. Commercial General Liability (CGL) coverage at their sole cost and
expense with limits of not less than
$5,000,000 in combined single limits for bodily injury and/or property
damage per occurrence, and such policies shall name PAR as an additional
insured.
2. Statutory Worker’s Compensation and Employers Liability Insurance
with limits of not less than $1,000,000, which insurance must contain a
waiver of subrogation against PAR and its affiliates [if permitted by state
law].
3. Commercial Automobile Liability insurance with limits of not less than
$1,000,000 combined single limit for bodily injury and/or property damage
per occurrence, and such policies shall name PAR as an additional insured.
4. Railroad Protective Liability (RPL) insurance with limits of not less than
$5,000,000 combined single limit for bodily injury and/or property damage
per occurrence and an aggregate annual limit of $10,000,000, which
insurance shall satisfy the following additional requirements:
a. The Railroad Protective Liability Insurance Policy must be on the
ISO/RIMA Form of Railroad Protective
Insurance - Insurance Services Office (ISO) Form CG 00 35.
01150-6
