15671-4
DUCTLESS SPLIT SYSTEM HEAT PUMP UNITS
h. Fan speed controls shall be user-selectable: high, medium, low or
microprocessor controlled automatic operation during all operating
modes.
The unit shall be protected against the following:
i. Indoor coil freeze-up.
j. Indoor coil high temperature protection shall be provided to detect
excessive indoor discharge temperature when unit is in heat pump mode.
5. Filters:
Units shall have filter rack with factory-supplied washable filter.
C. Systems shall be:
1. Mitsubishi
2. Daitkin
3. Or equal
PART 3 - EXECUTION
3.1 INSTALLATION
A. All system components shall be installed in strict accordance with the manufacturer’ s
instructions, recommendations and as shown on the Drawings.
3.2 STARTUP, TESTING, AND TRAINING
A. Provide startup, testing and training in accordance with the requirements of Section
01800.
END OF SECTION
13089K
