15094-6
PREFABRICATED PIPE HANGERS, SUPPORTS AND BRACING
ii. Carpenter & Patterson Inc. (Fig 1010)
iit. Or equal
g. Pipe Slide Assembly (w/ welded clamp) (Type G or F)
i. Anvil International, Inc. (Fig 257 or 436 w/ Fig 432 clamp)
ii. Carpenter & Patterson Inc. (Fig 1010 w/ Fig 158 clamp)
iit. Or equal
h. Floor Mounted Stanchions w/ Adjustable Saddles (Type S)
i. Anvil International, Inc. (Fig 63 Stanchion w/ Fig 264 or Fig 265
Saddle)
ii. Carpenter & Patterson Inc. (Fig 138 Stanchion w/ Fig 101 or Fig
101U Saddle)
iit. Or equal
i. Concrete cradles
i. Provide as detailed on the Structural Drawings
Type 3 (Type S) (all pipes)
1. Wall Bracket
a. Anvil International, Inc. (Fig 194, Fig 195 or Fig 199)
b. Carpenter & Patterson Inc. (Fig 69, Fig 84 or Fig 139)
c. Or equal
d. Fabricated brackets may be used in lieu of pre-fabricated brackets.
Material shall conform to Part C above.
Accessories:
1. Threaded Rods
i. Anvil International, Inc. (Fig 140, 142 or 146)
ii. Carpenter & Patterson Inc. (Fig 94 or 133)
iit. Or equal
2. Pipe Insulation Shield
i. Anvil International, Inc. (Fig 167 or Fig 168)
ii. Carpenter & Patterson Inc. (Fig 265GS or Fig 265P)
iit. Or equal
3. Pipe Insulation Saddle
i. Anvil International, Inc. (Figs 160-166A)
ii. Carpenter & Patterson Inc. (Figs 351-357Z)
iit. Or equal
4. Anti-seize compound
i. | Never Seez by Bostik, Inc.
ii. Or equal
Miscellaneous Pipe Hangers, Supports and Braces (Type 4 or Custom):
1. Contractor shall provide additional hangers, supports and braces as required
that are not classified as Types 1, 2 or 3 above.
2. Materials shall conform to Part C above.
Concrete Anchorage:
1. Epoxy anchors. ASTM C881, non-expanding, two-component epoxy resin
with AISC Type 316 Stainless Steel threaded road with washer nut.
Manufactured by Hilti Fastening Systems (HIT RESOOSD); Ramset Fastening
13089K
