15063-2
COPPER PIPE & FITTINGS
(INTERIOR APPLICATIONS)
f. Form continuous solder beads around the entire circumferences of the
joints.
Bending Pipe:
1. Bend pipe by the method and to the radius to comply with the manufacturer's
recommendation.
2. Bends shall be free of any cracks or buckles.
Support: Support all pipes in accordance with the "Pipe Hangers & Supports"
Section in this Division.
To permit convenient disassembly for alterations and repairs, install unions where
shown on the Drawings and:
1 In long runs of piping,
2. In bypasses around equipment,
3. In connections to traps, tanks, pumps, and other equipment,
4 Between shutoff valves, and
5 In other locations as directed by the Engineer.
Remove all valve internals when soldering into pipelines.
END OF SECTION
13089K
